734666
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
TQBJ2081
IP/MAC Address
To check this system’s IP address or the Wi-Fi MAC
address.
1 Press [NET/ ] repeatedly to select “NETWORK”.
2 Press [SETUP] repeatedly to select “NET INFO”.
3 Press [Y, U] repeatedly to select “IP ADDR.” or
“MAC ADDR.”.
The IP address or the MAC address is partially shown.
4 Press [Y, U] to show the rest of the IP address or
the MAC address.
Press [OK] to exit.
The “ – ” shown on the top or bottom left of the display
indicates the first and last units respectively.
Reset
To return all settings to the factory defaults.This function
will reset all memory contents and network settings.
1 Press [NET/ ] repeatedly to select “NETWORK”.
2 Press [SETUP] repeatedly to select “RESET”.
3 Press [Y, U] to select “OK? YES” and then
press
[OK].
“RESET” blinks. When the display returns to “CD”, the
settings are reset.
Troubleshooting
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated do not solve the problem, consult your
dealer for instructions.
For further dedicated help, support and advice about
your product please visit:
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
Common problems
The unit cannot be switched on.
Connect the AC mains lead and wait for a minimum of
10 seconds before switching on the unit.
The unit does not work.
The safety device has been activated. Do the following:
1. Press [1] on the unit to switch the unit to standby mode.
If the unit does not switch to standby mode, disconnect
the AC mains lead and connect it again.
2. Press [1] again to switch on the unit. If the problem
persists, consult your dealer.
No operations can be done with the remote control.
Examine that the battery is installed correctly.
Sound is distorted or no sound.
Adjust the volume of the system.
Switch off the system, determine and correct the cause, and
then switch on again. It can be caused by straining of the
speakers through excessive volume or power, and when
using the system in a hot environment.
A humming sound can be heard during playback.
An AC mains lead or fluorescent light is near the cables.
Keep other appliances and cords away from the cables of
this system.
Noise is heard.
Depending on the device, noise may be heard if the device
is connected to the AUX IN terminal and USB port at the
same time. Disconnect the cable from the USB port.
Disc
Display not shown correctly.
Playback does not start.
You have not put in the disc correctly. Put it in correctly.
Disc is dirty. Clean the disc.
Replace the disc if it is scratched, warped, or non-standard.
There is condensation. Let the system dry for 1 to 2 hours.
The total number of tracks shown is incorrect.
The disc cannot be read.
Distorted sound is heard.
You put in a disc that the system cannot play. Change to a
playable disc.
You put in a disc that has not been finalised.
Do you have the latest firmware installed?
Panasonic is constantly improving the system’s firmware
to ensure that our customers are enjoying the latest
technology.
(~18)
SC-HC2020 EB.GN TQBJ2081 En_Rev 1-spec.fm Page 20 Wednesday, April 25, 2018 9:07 AM
offset printing rev. 1
20


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-hc2020

Reset search

  • How to connect to panasonic HC2020-3c02 via Bluetooth Submitted on 15-10-2022 at 12:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC2020 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC2020

Panasonic SC-HC2020 User Manual - German, Dutch, French, Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info