452164
46
Zoom out
Zoom in
Previous page
1/52
Next page
46
VQT3M52
You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], the yellow button
and the blue button on the remote control at the same time
for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or [Í/I]
on the unit until “03 VL” is displayed on the unit’s display.
3 Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.
This unit does not recognize the USB connection
correctly.
If USB device is connected to this unit while playing a disc or
in a video communication ([BTT362]) the connection will not
be recognized. Press [HOME] and reconnect USB device.
[BTT362] USB memory and USB HDD are not recognized via
the rear USB port of this unit.
Disconnect and reconnect the USB cable. If it still does not
recognize the connection, turn this unit off and on again.
USB devices connected using a USB hub may not be
recognized by this unit.
[BTT362]
This unit does not recognize the communication camera
correctly.
Disconnect and reconnect the communication camera. If it
still does not recognize the connection, turn the unit off and
on again.
No power.
Insert the AC mains lead securely into a household mains
socket. (> 18)
The unit switches to standby mode.
When the time set for the sleep timer has passed, the main
unit will be turned off. (> 8)
One of the unit’s safety devices is activated. Press [Í/I] on
the main unit to turn the unit on.
This unit is turned off when the input for the TV is
switched.
This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
The unit does not turn off.
1
Press and hold [
Í
/I] on the main unit for 5 seconds. (If still
unable to turn the unit off, disconnect the AC mains lead, wait
1 minute, then reconnect the AC mains lead.)
2 Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME],
[< OPEN/CLOSE] and [Í/I] on the main unit at the same
time for more than 5 seconds.
The display is dim.
Change “Front Panel Display” in the Setup menu. (> 41)
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
An incorrect resolution is selected in “HDMI Video Format”.
Reset the setting as follows:
1 While the unit is on, press and hold [OK], the yellow button
and the blue button on the remote control at the same time
for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or [Í/I]
on the unit until “04 PRG” is displayed on the unit’s display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 41)
jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Default Settings”
and make proper settings. (> 43)
The unit and television are using different video systems.
While stopped, keep pressing [] (Stop) and [< OPEN/
CLOSE] on the main unit for 5 or more seconds. The system
switches from PAL to NTSC or vice versa.
The system used on the disc doesn’t match your television.
jPAL discs cannot be correctly viewed on an NTSC
television.
j
This unit can convert NTSC signals to PAL60 for viewing on
a PAL television (“NTSC Contents Output” in the “Picture”).
When “3D BD-Video Playback” in the Setup menu is set to
“Automatic”, images may not be output depending on the
connection method. After removing the disc from this unit, select
“Set before play” in the Setup menu, and select “2D Playback” in
the setup screen displayed when playing 3D discs. (
>
40)
When playing back a 3D disc, audio can be heard but no
video image on the TV.
Change the video input mode to the suitable HDMI video
input mode on the TV.
Video is not output.
Set “High Clarity Sound” in the playback menu to “Off” to use
the VIDEO OUT terminal. (> 39)
Video is not output in high-definition.
Confirm that “HDMI Video Format” in the Setup menu is set
properly. (> 41)
3D video is not output.
Are the settings on this unit and the TV correct? (> 29)
3D video is not output correctly as 2D.
Select “Set before play” in the Setup menu, and select “2D
Playback” in the setup screen displayed when playing 3D discs.
Discs that have recorded titles with Side by side (2 screen
structure) and that can be enjoyed in 3D are played back in
accordance with the settings of the TV.
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
Confirm the “TV Aspect” is set properly. (> 41)
Adjust the aspect setting on the television.
After choosing “Home Cinema” in “Speaker Selection” with the
TV’s remote control, the TV’s input selection also changes.
Disconnect the HDMI cable from the TV and reconnect it to a
different HDMI IN terminal.
Power
Displays
TV screen and video
SCBTT362_262_EB_VQT3M52_eng.book 46 ページ 2011年1月25日 火曜日 午後8時22分
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BTT362 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BTT362 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BTT362

Panasonic SC-BTT362 User Manual - German - 52 pages

Panasonic SC-BTT362 User Manual - Dutch, Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info