608302

Panasonic SAXR55 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
21
RQT7994
ConnectionsSettingsBasic Operations Before useOperationsReference
Receiver settings
-
Advanced
• Any changes to settings remain as set even if the power is turned off.
áPage 24 “Multi control menus and factory settings”.
Use the MULTI CONTROL menus to change the settings.
Set the size so that the speakers can adequately reproduce the bass range.
The following are set automatically.
• When you set “FRONT ” to “SMALL ”, “SUB-WFR ” is set to “YES ”.
• When you set “SUB-WFR ” to “NO ”, “FRONT ” is set to “LARGE ”.
By setting the distance between the speaker’s position (except the
subwoofer) and the listener’s seating position, the sound delay time is
automatically adjusted so that sound reaches the listener at the same
time.
If the Front speakers are set to “SMALL ”, make this setting.
Change the cut-off if the bass from the front speakers is unsatisfactory so
that this bass is output through the subwoofer.
This is displayed when you set “BI-WIRE ” in “Bi-wiring settings”. Select
this when you connect bi-wire compatible front speakers.
You can adjust HF (high frequency) and LF (low frequency) output
balance from the bi-wired speakers. You can also adjust the sound delay
time to offset the difference in HF and LF output directions.
Basic operations with the MULTI CONTROL
Turn to change.
Press to enter.
n To return to the previous setting/To cancel
Press.
n To select another settings
Press several times to return to step 2 in the
operations across and select another setting.
n To finish settings
Press several times to select “EXIT ” and
press [ENTER].
1
Enter the MULTI CONTROL.
Select “SETUP 2 ”
(“ADVANCE SETUP ”
scrolls once)
and press [ENTER].
Select the settings to change. (ábelow, right)
Speaker settings
2
Select “SPEAKERS ” and press [ENTER].
3
Select the speaker and press [ENTER].
SUB-WFR, FRONT, CENTER, SURROUND, SUR BACK
4
Change the setting and press [ENTER].
SUB-WFR: NO, YES FRONT: SMALL, LARGE
CENTER/SURROUND: NONE, SMALL, LARGE
SUR BACK: NONE, 1 SPKR, 2 SPKRS
NONE: For speakers you haven’t connected (center,
surround or surround back).
SMALL: For speakers that cannot adequately reproduce the
bass range. This setting is sufficient for most
speakers if you are using a subwoofer.
LARGE: For speakers that can reproduce a full sound range,
particularly the bass range below 80 Hz.
1 SPKR: If you connect one surround back speaker.
2 SPKRS: If you connect two surround back speakers.
For the subwoofer (SUB-WFR), select “YES ” if you have
connected one, or “NO ” if you have not.
Repeat steps 3 and 4 for each speaker channel.
5
Select another setting
Finish setting
VOLUMEINPUT SELECTOR
UPDOWN
ENTER
CANCEL
TUNEPRESET
SPEAKERS
POWER
AB
BAND
BI-AMP
DUAL AMP
MULTI
CONTROL
PHONES
VCR 2
VIDEO IN AUDIO INLR
INPUT SELECTOR
ENTER
CANCEL
MULTI
CONTROL
INPUT SELECTOR
ENTER
CANCEL
MULTI
CONTROL
CANCEL
MULTI
CONTROL
INPUT SELECTOR
Distance setting
2
Select “DISTANCE ” and press [ENTER].
3
Select the speaker and press
[ENTER].
FRONT,
CENTER,
SURROUND,
SUR BACK
4
Set the distance and press
[ENTER].
You can select differences at one foot intervals.
5
Select another setting
Finish setting
Filter setting
2
Select “FILTER ” and press [ENTER].
3
Select the bass filter frequency
and press [ENTER].
• This setting is effective for all speakers set to
“SMALL ” in “Speaker settings”.
80, 100, 150,
200 (Hz)
4
Select another setting
Finish setting
Bi-amp setting
2
Select “BI-AMP ” and press [ENTER].
Adjusting the balance
Correcting the HF and LF
difference
3
Select “
BALANCE
”
and
press [ENTER]
.
3
Select “HF PHASE ”
and press [ENTER].
4
Adjust the balance
and press [ENTER].
• The bar shows the
standard balance.
4
Set the difference and
press [ENTER].
You can select differences at
0.03 feet intervals.
5
Select another setting
Finish setting
(MIN) (MAX)
L H
0.00 FEET
(MIN) (MAX)
Difference
HF
LF
(Side view of a
speaker in
cross section)
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SAXR55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SAXR55 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SAXR55

Panasonic SAXR55 User Manual - German, Dutch, Danish - 168 pages

Panasonic SAXR55 User Manual - Polish, Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info