608302
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
RQT7994
ConnectionsSettingsBasic Operations Before useOperationsReference
Use the MULTI CONTROL menus to change the settings.
(ápage 18 “Basic operations with the MULTI CONTROL”)
1
Enter the MULTI CONTROL.
Select the settings to change. (ábelow, right)
Adjusting the tone
You can adjust the level of the bass and treble.
2
Select “TONE ” and press [ENTER].
3
Select “BASS ” or “TREBLE ” and
press [ENTER].
BASS,
TREBLE
4
Adjust the level and press [ENTER].
5
Select another setting
Finish setting
Adjusting the volume balance
You can adjust the balance of the front speakers.
2
Select “BALANCE ” and press [ENTER].
3
Adjust the balance and press
[ENTER].
4
Select another setting
Finish setting
Adjusting the brightness of the display
Dim the display for better viewing in a darkened room.
Choose a level between 1 (bright) and 3 (dim).
2
Select “DIMMER ” and press [ENTER].
3
Select “ON ” and press [ENTER].
•SelectOFF ” to cancel.
OFF, ON
4
Select the level and press [ENTER].
LEVEL 1,
LEVEL 2,
LEVEL 3
5
Select another setting
Finish setting
When you operate the main unit or remote control, this is temporarily
canceled.
Sleep timer
The sleep timer can turn the unit off after a set time.
It does not control any other components.
2
Select “SLEEP ” and press [ENTER].
3
Select the time and press [ENTER].
When this is set, “SLEEP” appears on the display.
To cancel, select “OFF ”.
OFF, 30, 60,
90, 120
(in minutes)
4
Select another setting
Finish setting
To check the setting:
After setting the time, you can check the remaining time using step 2.
To change a setting:
Repeat the procedure from the beginning.
CANCEL
MULTI
CONTROL
(MIN) (MAX)
L R
The bar shows the
standard balance.
Changing the audio output (Dual program)
When the input signal is Dolby Digital, DTS andDUAL ” appears in the
display, the audio to be output is set.
2
Select “OPTION ” and press [ENTER].
3
Select “DUAL PRG ” (DUAL PROGRAM) and
press [ENTER].
4
Select the audio and press [ENTER].
MAIN: Main audio output
SAP: Sub channel audio output
MAIN+SAP: Main and sub channel audio output
5
Select another setting
Finish setting
The setting remains in effect even if the power is turned off.
Listening comfortably at low volume
Change this setting to listen to software recorded with Dolby Digital at
low volume (such as late at night) maintaining audio clarity. It reduces
the peak level in loud scenes without affecting the sound field.
2
Select “OPTION ” and press [ENTER].
3
Select “DR COMP ” (DYNAMIC RANGE
COMPRESSION) and press [ENTER].
4
Select the level and press [ENTER].
OFF: The software is played with the original
dynamic range.
STANDARD: The level recommended by the producer of
the software for household viewing.
MAX: The maximum allowable compression
(recommended for night viewing).
5
Select another setting
Finish setting
A/D attenuator
Turn the A/D attenuator on if “OVERFLOW ” lights frequently when
using 2-channel analog input or DVD ANALOG 6CH input.
2
Select “OPTION ” and press [ENTER].
3
Select “A/D ATT ” (A/D ATTENUATOR) and press
[ENTER].
4
Select “ON ” and press [ENTER].
To cancel, select “OFF ”.
OFF,
ON
5
Select another setting
Finish setting
The RESET function
The operation settings for the unit will be initialized to the settings made
at the time of shipment.
However, any preset radio stations will not be erased.
2
Select “OPTION ” and press [ENTER].
3
Select “RESET ” and press [ENTER].
4
Select “YES ” and press [ENTER].
To cancel, select “NO ”.
• When you select “YES ”, the input source becomes
TUNER ” (Preset Channel 1).
NO,
YES
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SAXR55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SAXR55 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SAXR55

Panasonic SAXR55 User Manual - German, Dutch, Danish - 168 pages

Panasonic SAXR55 User Manual - Polish, Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info