[SOUND MODE, STEREO, SURROUND, SFC]
DSP sound mode indicators.
Show the current DSP sound mode.
[kHz, MHz]
Frequency unit indicators.
kHz: AM, MHz: FM
The display
[SPEAKERS]
Speaker indicator.
Lights when the speakers are on.
General display
Shows the input mode, radio frequency, and other general information.
[TUNED, MONO, STEREO, ˜]
Radio indicators.
TUNED: A station is tuned.
MONO: You have switched to monaural mode with [-BAND,
–FM MODE] to improve reception.
STEREO: A stereo FM broadcast is tuned.
˜: Flashes during presetting.
[POWER, 8]
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
[SPEAKERS]
Turning the speakers off automatically engages the STEREO mode
(when listening through headphones, for example).
[-HELP, –RESET]
Press if an error message appears. A message offering a possible
solution scrolls across the display.
To reinitiate the unit’s settings, press and hold until “RESET” appears.
[PHONES]
Headphone jack
Plug type: 6.3 mm (1/4") stereo
Avoid listening for prolonged periods of time to prevent hearing damage.
Turn the speakers off when using the headphones.
[TUNING, 2, 1]
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start automatic
tuning. Tuning stops when a station is found.
[PRESET]
Press to allow preset station selection with [TUNING, 2, 1].
[-BAND, –FM MODE]
For switching between AM and FM.
If reception is poor in FM, press and hold until “MONO” appears to
switch to monaural mode.
[DSP SOUND MODE]
For selecting “STEREO”, “SURROUND” or “SFC”.
[MEMORY]
For presetting radio stations.
[SFC MODE, <, >]
For selecting the SFC modes.
[DOLBY PRO LOGIC
22
]
Use when “%PRO LOGIC 2” lights in the SURROUND mode.
Operations
