608260
6
Zoom out
Zoom in
Previous page
1/56
Next page
6
RQTN0173
6
System settings
To view the System menu
When in DAB mode
1 Press [MENU].
2 Turn [ TUNE/SELECT ] to select “System” and
then press [ENTER].
When in FM mode
Press [MENU].
To navigate around the menu
Turn [ TUNE/SELECT ] to select an item or option.
Press [ENTER] to confirm.
Example: Backlight setting displays
Troubleshooting
General
Sound is distorted or no sound.
Adjust the volume.
Check and adjust the antenna.
Move the unit to another location and do a full scan
again.
An AC mains lead or fluorescent light is near the
cables. Keep other appliances and cords away from
the cables of this unit.
Reception is poor or beat sound is heard.
Keep the antenna away from computers, TVs, other
cables and cords. Move mobile telephones away from
the unit if the interference is apparent.
Messages
“Service not available”
•No DAB reception.
“No DAB station”
No DAB station available.
Check the antenna.
Move the unit to another location and do a full scan
again.
“Time Not saved”
The changes made to the time was not saved, the
changes will be lost.
“Alarm Not saved”
The changes made to the alarm was not saved, the
changes will be lost.
Alarm The Alarm Wizard is shown.
Alarm: On, Off
Select “On” to switch on the alarm.
On time: Set the hours and minutes of
start time.
Source: Buzzer, DAB, FM
Set the audio source.
If FM or DAB is set, select the last
station you tuned in to (“Last listened”)
or a preset station as the audio source.
Set the volume
The alarm starts at a low volume and
increases gradually to the preset level.
” is shown after you set the alarm.
Note:
The alarm does not work when the unit is
powered by batteries.
Check that the date and time are set
correctly, or else the alarm may not work
as desired.
The alarm will come on at the set time
every day for a duration of 90 minutes.
Press any button or turn any knob to stop
the alarm.
You need to set the alarm again every
time you disconnect and connect the AC
power or after you remove the batteries.
Sleep The sleep timer switches off the unit after
the set time (in minutes).
Sleep Off, 30 minutes, 60 minutes,
90 minutes, 120 minutes
“” is shown.
Equaliser Flat, Heavy, Soft, Clear, Vocal
“” is shown.
Indicates current setting
Time The time and date information are
updated automatically with the DAB/RDS
broadcast (if available).
You can also set the time and date
manually with the Time menu.
This is a 24 hour clock.
Set time: Set the hours and minutes.
Set date: Set the day, month and year.
Backlight 10 sec: The backlight switches off after
10 seconds of inactivity.
On: The backlight is always on.
Language You can change the language for the
display panel.
English, Italiano, Deutsch, Français
Factory
Reset
Yes, No
Select “Yes” to reset the unit to factory
default setting.
rf-d10eg.book Page 6 Friday, January 3, 2014 4:54 PM
printing
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic RFD10EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RFD10EB in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info