608260
4
Zoom out
Zoom in
Previous page
1/56
Next page
4
RQTN0173
4
Power sources
Using the household mains socket
Connect the AC mains lead firmly to the unit and the
household mains socket.
Note:
Do not use an AC mains lead from other equipment.
This unit consumes a small amount of power when it is in
standby mode. Disconnect the power supply if you do not
use the unit.
Using the batteries (not supplied)
Use alkaline or manganese batteries.
Install the batteries so that the poles (+ and –) align with
those in the unit.
This unit will use the batteries as the power source when
you disconnect the AC mains lead. The battery indicator
will light up.
The battery indicator shows the battery levels.
Note:
The unit switches on after you insert the batteries.
When the battery indicator “ ” begins flashing, replace all
4 of the batteries.
After the battery indicator flashes for 10 seconds, the unit
will switch off automatically.
Getting started
1 Extend the antenna.
2 Press [1] to switch on the unit.
The first time you switch on the unit, it will enter DAB
mode and automatically scan for stations. It sets the time
and date (if data is available) and starts playing the first
station it finds.
Note:
In standby mode, the unit shows the time and date (only when
the unit is powered by AC).
DAB
DAB (Digital Audio Broadcasting) is a procedure of
broadcasting the radio digitally. It gives less interference
and better sound quality.
This unit supports DAB in “BAND III” bands.
DAB operation
The first time you enter DAB mode, or if the station list is
empty, the unit will start the full scan and memorise the
stations.
You can perform the full scan procedure when there is a
new station or a station becomes available.
1 Press [BAND] to select “DAB”.
2 Press [MENU] to select “Full scan” and then press
[ENTER] to start full scan.
To cancel, press [MENU].
Remove unavailable listed stations
This unit indicates those stations that are closed or no
longer available with a question mark in front of the
station name. You can remove these stations from the
station list.
1 Press [MENU] and then turn [ TUNE/SELECT ] to
select “Prune”.
2 Press [ENTER].
3 Turn [ TUNE/SELECT ] to select “Yes” and then
press [ENTER].
To cancel, select “No”.
1
2
3
4
R14/LR14, C
Press towards while
inserting the battery.
Number of stations found
rf-d10eg.book Page 4 Friday, January 3, 2014 4:54 PM
printing
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic RFD10EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RFD10EB in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info