734869
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
TQBJ2225
DAB/DAB+ reception is poor.
Keep the antenna away from computers, televisions, other
cables and cords.
Move the unit to another location and do a full scan again.
Static or noisy reception is heard while listening
to a radio broadcast.
Check and adjust the antenna.
Try to keep a certain amount of distance between the
antenna and AC adaptor.
Turn the TV or other audio players off or separate it from
this unit.
Keep this unit away from mobile phones if there is
interference.
Noise would be heard when batteries are low. Connect the
AC adaptor or replace batteries.
Pairing cannot be done.
Check the Bluetooth
®
device condition.
The device is out of the 10 m communication range. Move
the device nearer to the system.
The device cannot be connected.
The pairing of the device was unsuccessful. Do pairing
again.
The pairing of the device has been replaced. Do pairing
again.
This unit might be connected to a different device.
Disconnect the other device and try connecting the device
again.
Turn the unit off and on and then reconnect.
The device is connected but audio cannot be
heard through the system.
For some built-in Bluetooth
®
devices, you have to set the
audio output to “RF-D30BT” manually. Read the operating
instructions of the device for details.
Sound from the device is interrupted.
The device is out of the 10 m communication range. Move
the device nearer to the system.
Remove any obstacle between the system and the device.
Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.) are
interfering. Move the device nearer to the system and
distance it from the other devices.
The following messages may appear on the unit’s
display.
“Alarm Not saved
The changes made to the alarm settings are incomplete.
The changes will be lost.
“Linking”
This system is trying to connect to the last connected
Bluetooth
®
device when “Bluetooth” is selected.
“No DAB Station”
No DAB/DAB+ station available.
Check the antenna.
Move the unit to another location and do a full scan again.
“Preset Empty”
There are no preset DAB/DAB+ stations to select. Preset
some channels. (l 7)
“Service not available”
No DAB/DAB+ reception.
“Time Not saved”
The changes made to the time settings are incomplete.
The changes will be lost.
“USB Overcurrent Remove Device”
The USB device is using too much power. Disconnect the
USB device. Then, disconnect the AC adaptor from the AC
mains socket, and then reconnect the AC adaptor to the
AC mains socket.
Check the connection, it may be caused by a faulty cable.
Maintenance
Disconnect the AC adaptor from the outlet before
maintenance.
Clean this unit with a soft, dry cloth
When dirt is heavy, wring a wet cloth tightly to wipe the dirt,
and then wipe it with a dry cloth.
Never use alcohol, paint thinner or benzine to clean this
unit.
Before using chemically treated cloth, carefully read the
cloth’s instructions.
To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory defaults to delete the user
settings.
(l 11, “To return all settings to the factory defaults”)
Radio
Bluetooth
®
Messages
RF-D30BT_TQBJ2225_eng.book 12 ページ 2020年5月13日 水曜日 午前11時44分
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic RF-D30BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RF-D30BT in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic RF-D30BT

Panasonic RF-D30BT User Manual - German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info