536677
99
Zoom out
Zoom in
Previous page
1/115
Next page
Troubleshooting
Please check following points. For details, see the corresponding pages.
Problem Cause
Reference
page
Power does not turn on.
The power cord may not be connected. f
No electric supply is at the wall outlet. f
The circuit breakers have tripped. f
Is the <LAMP> indicator or <WARNING > indicator lit or blinking? f
The lamp cover has not been securely installed. f
35, 94
97
No picture appears.
The video signal input source may not be connected to a terminal properly. f
The input selection setting may not be correct. f
The [BRIGHTNESS] adjustment setting may be at the minimum setting. f
The input source which is connected to the projector may have a problem. f
The AV MUTE function may be in use. f
31
40
50
41
The picture is fuzzy.
The lens cap is still attached to the lens. f
The lens focus may not have been set correctly. f
The projector may not be at the correct distance from the screen. f
The lens may be dirty. f
The projector may be tilted too much. f
17
38
26-27
17
The color is pale or
grayish.
[COLOR] or [TINT] adjustment may be incorrect. f
The input source which is connected to the projector may not be adjusted f
correctly.
RGB cable is damaged. f
50
No sound from the
internal speaker.
The input terminals may not have been correctly connected. f
The volume may have been set to the minimum level. f
The AV MUTE function may have been turned on. f
When the VARIABLE AUDIO OUT is plugged-in, the projector's built-in speaker f
is not available.
The MUTE function may have been turned on. f
29-32
42, 70
42
22
42,70
The remote control does
not operate.
The batteries may be weak. f
The batteries may not have been inserted correctly. f
The remote control signal receptor on the projector may be obstructed. f
The remote control unit may be out of the operation range. f
Strong light such as uorescent shine onto the signal receptor. f
When different codes are set on the projector and on the remote control. f
The [REMOTE CONTROLLER] setting is set to [DISABLE] in [CONTROL f
DEVICE SETUP].
23
20
20
21
67
75
The control buttons of
the projector do not
operate.
The [CONTROL PANEL] setting is set to [DISABLE] in [CONTROL DEVICE f
SETUP].
75
The picture does not
display correctly.
There may be a problem with the VCR or other signal source. f
A signal which is not compatible with the projector is being input. f
108-109
Picture from a computer
does not appear.
The cable may be longer than the optional cable. f
The external video output from a laptop computer may not be correct. f
Picture from a HDMI
device does not appear
or picture is not stable.
Is the HDMI cable securely connected? f
Turn off the power of the projector and the connected devices. Then turn the f
power of the projector and the connected devices back on.
Isn't unsupported signal cable connected? f
31
108-109
No sound is output from
a HDMI device.
Set the sound channel of the attached device to Linear PCM. f
Attention
If the problem persists, after conrming the contents of the table, please consult your dealer. f
ENGLISH - 99
Chapter 5 Maintenance - Troubleshooting
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info