536677
98
Zoom out
Zoom in
Previous page
1/115
Next page
Turn off the Power by following the procedure in "1) Powering Off the Projector" (
Æ
page 37). Remove
the AC power plug from the wall outlet. Wait at least 1 hour and make sure the lamp unit and
surroundings are cool.
Remove the lamp cover. 2)
Use a Phillips screwdriver to loosen the lamp cover fixing screw (×1) and remove the lamp cover.
Remove the lamp cover by pulling it slowly toward the direction of the arrow. f
Remove the 3) lamp unit.
Use a Phillips screwdriver to loosen the three lamp unit fixing screws (×3) until the screws turn freely.
Hold the used lamp unit by its handles, and pull it gently from the projector.
Attach the unused lamp unit. 4)
Insert the new lamp unit in correct direction. Tighten the three lamp unit fixing screws (×3) securely
with a Phillips screwdriver.
Attach the lamp cover. 5)
Attach the lamp cover, and tighten the lamp cover fixing screw (×1) securely with a Phillips
screwdriver.
Attach the lamp cover by pushing it slowly opposite the direction of the arrow. f
Note
When you replace the lamp unit with new one, the projector resets the runtime of the lamp unit automatically. f
Attaching the Lens Cap
When moving this projector or while not using it over an extended period of time, attach the lens cap.
To prevent loss for the lens cap, please according to the following procedures, attach the lens cap with the string of
accessories.
Thread the thinner end of the string through the hole on the lens cap.1)
Thread the other end of the string through the hole on the bottom of the projector.2)
Lens cap
String
98 - ENGLISH
Chapter 5 Maintenance - Replacement
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info