511571
50
Zoom out
Zoom in
Previous page
1/60
Next page
References
50
ENGLISH
Troubleshooting
Conrmthefollowingproblemandcause.
If the suggested solutions do not solve the problem, contact an Authorized Service Center.
Problem Cause Page
Power does not turn
on.
The power cord may not be connected securely. z
No electric supply at the wall outlet. z
The circuit breakers have tripped. z
TEMP z or LAMPindicatorislitorashes.
The lamp unit cover has not been securely installed. z
CONTROL PANEL z in the PROJECTOR SETUP menu is invalidated.
20
45
48
44
No picture appears.
The lens cover is not removed. z
The input terminal may not be connected properly. z
The input selection setting may not be correct. z
The z BRIGHTNESS adjustment setting may be at the minimum setting.
The signal input source may not be operating properly. z
The z AV MUTE function may be in use.
18, 19
24
30
25
The picture is fuzzy.
The lens focus may not have been set correctly. z
The projector may not be at the correct distance from the screen. z
The lens may be dirty. z
The projector may be tilted too much. z
24
16
46
24
Color is pale or
grayish.
COLOR z or TINT adjustment may be incorrect.
The input source which is connected to the projector may not be z
adjusted correctly.
31
No sound can be
heard from the internal
speaker.
The audio signal may not be connected properly. z
The volume adjustment may be at the lowest possible setting. z
A cable may be connected to the z AUDIO OUT terminal.
18, 19
26, 40
14
The remote control
does not operate.
The batteries may be weak. z
The batteries may not have been inserted correctly. z
The remote control signal receptor on the projector may be obstructed. z
The remote control unit may be out of the operation range. z
REMOTE CONTROLLER z in the PROJECTOR SETUP menu is
invalidated.
Theremotecontrolisunderastronglightsuchasuorescent. z
15
15
15
44
15
The control buttons of
the projector do not
operate.
CONTROL PANEL z in the PROJECTOR SETUP menu is invalidated.
(If you have a loss of the remote control while the CONTROL PANEL
is invalidated, press and hold [MENU] for 2 seconds by pressing
[ENTER].)
44
The picture does not
display correctly.
The signal format ( z TV-SYSTEM, RGB/YP
B
P
R
) may not have been set
correctly.
There may be a problem with the VCR or other signal source. z
A signal which is not compatible with the projector is being input. z
31, 32
52
Picture from a
computer does not
appear.
The RGB signal cable is too long. (Limit to 10 m (32' 10").) z
The external video output from a laptop computer may not be correct. z
(You may be able to change the external output settings by pressing
the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
varies depending on the type of computer; refer to the documentation
provided with your computer for further details.)
36
The projector cannot
be controlled through
serial terminal.
EMULATE z in the PROJECTOR SETUP menu is not set correctly.
(If you fail to select your product series, ask your dealer for repair.)
40
References
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-ST10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-ST10E in the language / languages: English as an attachment in your email.

The manual is 8,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info