511571
48
Zoom out
Zoom in
Previous page
1/60
Next page
Maintenance
48
ENGLISH
Care and Replacement (continued)
Lamp replacement procedure
When the projector is mounted in the ceiling, do not work directly under the projector or put your face close to the •
projector.
Be sure to install the lamp unit and attach the lamp unit cover securely. If they are not securely installed, it may •
cause the protection circuit to operate and the power cannot be turned on.
1
Disconnect the power plug from the wall outlet
according to “TURN THE PROJECTOR OFF”
(
page 23), wait for at least 1 hour and check
the bottom if the lamp unit has cooled.
2
Use a Phillips-head screwdriver to loosen the
1 lamp unit cover screw on the back of the
projector until the screw loosen and remove
the lamp unit cover.
COMPUTER 1 IN
S-VIDEO
IN
VIDEO IN
AUDIO IN
1 2
AUDIO OUT
COMPUTER 2 IN
3
Use a Phillips-head screwdriver to loosen the
2 lamp unit screws. Pull the used lamp unit
gently from the projector.
Lamp unit cover
Rear side
Top sideLamp unit cover
Lamp unit cover screw
Lamp unit screws
Handles
4
Press in the lamp unit until it clicks and make
sure the unit is installed securely. Tighten the
2 lamp unit screws securely with a Phillips-
head screwdriver.
During insertion, particularly press the portion
securely.
5
Attach the lamp unit cover and tighten the
1 lamp unit cover screw securely with a
Phillips-head screwdriver.
6
Connect the power cord to a wall outlet.
7
Press [POWER] to begin projection.
NOTE:
If • INITIAL START UP in the PROJECTOR SETUP menu
is set to ON, the projector starts projecting when the power
cord is connected to a wall outlet. (
page 39)
8
MENU
To display the main
menu.
To scroll to the
PROJECTOR SETUP
menu.
Lamp unit screws
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-ST10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-ST10E in the language / languages: English as an attachment in your email.

The manual is 8,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info