511529
77
Zoom out
Zoom in
Previous page
1/119
Next page
[Setting] menu
ENGLISH - 77
Settings
[Logo PIN code change]
Changes the logo PIN code.
1) Select [Logo PIN code change], and
press the <ENTER> button.
z
The PIN code input screen is displayed.
2) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to enter the PIN code.
3) Press
▲▼◀▶
to select [Set].
4) Press the <ENTER> button.
z
If the PIN code is accepted, the new logo PIN
code is displayed on the screen.
5) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to set your new PIN code.
6) Press the <ENTER> button.
7) Select [Yes], and press the <ENTER>
button.
z
If the PIN code is accepted, the projector
returns to the sub menu 2.
Note
z
To re-enter a number, press
◀▶
to select the digit
to re-enter, then press
▲▼
or the number (<0> -
<9>) buttons to re-select the number.
z
Move the cursor to [Cancel] and press the
<ENTER> button to return to the sub menu 2.
[Fan control]
The projector controls the rotation of the fan
automatically. You can make the rotation of the fan
stronger depending on the ambient temperature or
where the projector is installed (for example, when it
is to be used at a high altitude).
1) Press
▲▼
to select [Fan control].
2) Press the <ENTER> button.
3) Press
▲▼
to switch the setting.
[Normal] [Max]
[Normal]
Controls the fan operation
automatically.
[Max]
Forces the fan to work at maximum
capacity. Then sound of the fan
rotating will be louder than with
[Normal].
[Remote control]
Allows simultaneous control or individual control with
a single remote control when multiple projectors are
used side by side.
1) Press
▲▼
to select [Remote control].
2) Press the <ENTER> button.
3) Press
▲▼
to select.
z
The factory default setting is [All].
[All]
Makes projector accept input from
remote control of any ID number.
[Code 01] -
[Code 64]
Sets ID numbers from 1 - 64.
4) Press the <ENTER> button.
5) Select [Yes], and press the <ENTER>
button.
z
[Remote control] will change.
z
Returns the projector to the sub menu.
Note
z
When the ID number of the projector is changed,
the ID number of remote control must be matched
to the ID number of the projector.
z
If a projector is set to [All] with multiple projectors in
use, the projector cannot be controlled separately
from the projectors with other ID numbers.
[RC sensor]
Enables and disables the remote control sensor on
the projector body.
1) Press
▲▼
to select [RC sensor].
2) Press the <ENTER> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to switch the setting.
[Both]
Enables all sensors on front or rear
of the projector body.
[Front]
Enables only remote control sensor
on front of the projector body.
[Back]
Enables only remote control sensor
on rear of the projector body.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX12K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX12K in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX12K

Panasonic PT-EX12K User Manual - German - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info