511529
76
Zoom out
Zoom in
Previous page
1/119
Next page
[Setting] menu
76 - ENGLISH
Settings
[HDMI setup]
If the image cannot be correctly displayed when an
external device is connected to the projector using
HDMI, change the settings.
1) Press
▲▼
to select [HDMI setup].
2) Press the <ENTER> button.
3) Press
▲▼
to switch the setting.
[Normal] [Enhanced]
[Normal]
Select when the output from the
external device is “NORMAL
*1
”.
[Enhanced]
Select when the output from the
external device is “ENHANCED
*1
”.
*1: The titles of the output settings differ depending on the
device. For details, refer to the operating instructions of the
external device.
[Logo]
Sets logo selection and the PIN code for logo
selection.
1) Press
▲▼
to select [Logo].
2) Press the <ENTER> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to select.
[Logo select]
1) Select [Logo select], and press the
<ENTER> button.
2) Press
▲▼
to switch the setting.
z
The setting will change as follows each time
you press the button.
[Off] [User]
*1
[Default]
[Off] Clears logo from screen.
[User]
*1
Displays the image registered by the
user.
[Default]
Displays in the factory default
settings.
*1: Available when the image is registered.
z
“Logo Transfer Software” is required to register
the image.
[Logo PIN code lock]
Sets the system to make the setting and changing
of the “logo” only by the administrator.
1) Select [Logo PIN code lock], and press
the <ENTER> button.
z
The PIN code input screen is displayed.
2) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to enter the PIN code.
3) Press
▲▼◀▶
to select [Set].
4) Press the <ENTER> button.
z
If the PIN code is accepted, the projector
returns to the sub menu 2.
5) Press
▲▼
to switch the setting.
[Off] [On]
[Off]
The logo selection can be changed
without the PIN code.
[On]
The PIN code is required to change
the logo selection.
Note
z
The entered PIN code is displayed with * mark on
the screen.
z
The factory default setting for the logo PIN code is
“4321”.
z
To re-enter a number, press
◀▶
to select the digit
to re-enter, then press
▲▼
or the number (<0> -
<9>) buttons to re-select the number.
z
Move the cursor to [Cancel] and press the
<ENTER> button to return to the sub menu 2.
z
If [Logo PIN code] and the number are displayed in
red, an error has occurred. Re-enter the number.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX12K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX12K in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX12K

Panasonic PT-EX12K User Manual - German - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info