511534
101
Zoom out
Zoom in
Previous page
1/179
Next page
[PROJECTOR SETUP] menu
ENGLISH - 101
Settings
Note
z
For a set time after [LAMP SELECT] is switched,
[LAMP SELECT] cannot be switched again,
because the speed of the lamp replacement cycle
will increase. Repeatedly switching [LAMP SELECT]
in a short time will also increase the speed of the
lamp replacement cycle.
z
The colors of the items indicate the status.
Green → Current setting
Yellow → Current setting
(When there is a lamp that cannot turn on or failed
to turn on)
Red → Lamp that has failed to turn on
White → Any other status
z
When a lamp fails to turn on or has been used in
excess of 2 000 hours and a setting other than
[QUAD] is selected, that lamp is turned off and
another lamp turned on.
When a lamp fails to turn on or has been used in
excess of 2 000 hours in [QUAD], a lamp that has
not been used in excess of 2 000 hours is turned
on.
The projector enters standby mode when all lamps
have been used in excess of 2 000 hours.
z
Ensure that lamp units not to be turned on are also
installed.
z
More lamps than the specied number of lamps
light temporarily to prevent decreased illuminance
when a lamp is switched.
[LAMP RELAY]
The lump to be turned on can be automatically
switched by setting a day and time.
The degradation of the lamp due to continuous usage
can be reduced by automatically switching the lamp
to be turned on when using the projector continuously
for a week or more.
1) Press

to select [LAMP RELAY].
2) Press
󱚣󱚤
to switch [LAMP RELAY].
z
The time setting to switch the lamp will change
as follows each time you press the button.
[OFF] [24H] [1WEEK]
3) Press

to select [TIME].
4) Press the <ENTER> button.
z
Enters adjustment mode (the display is
blinking).
5) Press
󱚣󱚤
to select [HOUR] or
[MINUTE], and then press

to
adjust it.
(1 hour or 1 minute increments)
[00:00] [00:01] [00:59]
6) Press the <ENTER> button.
z
The adjusted time is established.
7) Press

to select [DAY OF THE
WEEK].
8) Press
󱚣󱚤
to switch [DAY OF THE
WEEK].
z
The setting will change as follows each time
you press the button.
[SUNDAY] [MONDAY] [TUESDAY]
[WEDNESDAY]
[SATURDAY] [FRIDAY] [THURSDAY]
Note
z
The [LAMP RELAY] function is enabled when
[SINGLE], [DUAL], [TRIPLE], or [QUAD] is selected
in [LAMP SELECT].
z
When [SINGLE] or [DUAL] is selected in [LAMP
SELECT], the lamp switches to the specied time.
When [TRIPLE] is selected in [LAMP SELECT], the
lamp switches a total of three times every two hours
from the specied time, and thereafter maintains
the previous status until the specied time.
When [QUAD] is selected in [LAMP SELECT],
three turn on at the specied time and the three
lamps switch every two hours for a total of four
times. Next, four lamps turn on eight hours after the
specied time and thereafter three lamps switch
again after the specied time.
z
The operating time will be the local time. (
page 110)
z
Use the number (<0> to <9>) buttons on the remote
control to directly enter the time.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ21KE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ21KE in the language / languages: English as an attachment in your email.

The manual is 17,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ21KE

Panasonic PT-DZ21KE User Manual - German - 190 pages

Panasonic PT-DZ21KE User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info