Remove the air lter unit beforehand with the previously described procedure of “Removing the air lter unit”.
Fig. 1Fig. 2
1) Wash the air filter unit. (Fig. 1)
i) Soak the air filter unit in cold or warm water and then lightly rinse it.
fDo not use cleaning tools such as brushes.
fWhen rinsing, hold the frame of the air lter unit without putting strong pressure on the lter unit.
ii) Rinse the air filter unit two to three times using fresh water each time.
fInsufcient rinsing may result in odors.
2) Dry the air filter unit. (Fig. 2)
fLet the air lter unit naturally dry off in a well-ventilated place where there is little dust and is not exposed to direct sunlight.
fDo not dry using drying devices such as dryers.
fAfter the air lter is dried, proceed to “Attaching the air lter unit” (x page 144).
Attaching the air lter unit
Protrusion of the air filter unit
Tabs on the projector body
Tabs on the projector body
Groove on the projector body
Protrusion of the air filter unit
Groove on the projector body
1) Attach the air filter unit to the projector.
fThe air lter unit has no difference between top and bottom, but is two-sided. Match the protrusion position of the air lter unit with the
grooves on the projector body.
fHook the air lter unit frame at the air exhaust port side to the two tabs of the back side of the projector’s air lter unit compartment
and perform Step 2) in “Removing the air lter unit” in the reverse order to attach.
fConrm that the tabs of the air lter unit compartment of the projector body are hooked to the air lter unit frame.
2) Attach the air filter cover to the projector and use a Phillips screwdriver to tighten the air filter cover
screw.
fPerform Step 2) in “Removing the air lter unit” (x page 143) in the reverse order.
Attention
fAfter washing the air lter unit, dry it thoroughly before attaching it back to the projector. Attaching a wet unit will cause an electric shock or
malfunction.
fDo not disassemble the air lter unit.
fTake care not to touch the radiator n when removing dirt or dust.
Note
fMake sure that the air lter unit is properly attached before using the projector. If it is not properly attached, the projector will suck in dirt and
dust causing a malfunction.
fIf you use the projector without attaching the air lter unit, the lter indicator <FILTER> blinks in red and the message appears on the
projected image for approximately 30 seconds.
fReplace the air lter unit with the new optional Replacement lter unit (Model No.: ET-EMF510) if it is damaged or if the dirt does not come
off even after washing.
fAir lter replacement is recommended after cleaning the unit two times.
fThe dust-proof properties may be reduced after each cleaning.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Panasonic PT-DZ16KU at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Panasonic PT-DZ16KU in the language / languages: English as an attachment in your email.
The manual is 19,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
