548352
90
Zoom out
Zoom in
Previous page
1/108
Next page
Maintenance/Replacement
90 - ENGLISH
Maintenance
4) Attach the air lter unit to the
projector.
z
The air lter unit has vertical distinctions. (Check
the direction of the allow
ヶヱ
.)
z
Perform Step 2) in the reverse order.
5) Attach the air lter cover to the
projector and use a Phillips
screwdriver to tighten the air lter
cover screw.
z
Perform Step 1) in the reverse order.
Attention
z
After washing the air lter unit, dry it thoroughly
before attaching it back to the projector. Attaching a
wet unit will cause an electric shock or malfunction.
z
Do not disassemble the air lter unit.
Note
z
Make sure that the air lter is properly attached
before using the projector. If it is not properly
installed, the projector will suck in dirt and dust
causing a malfunction which turns the power off
after ten minutes. (The time remaining before
the power is turned off is displayed in one minute
intervals.)
z
Replace the air lter unit with a replacement lter
unit (ET-EMF300) if it is damaged or if the dirt does
n
ot come off even after washing.
z
Air lter replacement is recommended after
cleaning the unit two times.
z
The dust-proof properties may reduce after each
cleaning.
Replacing the unit
Air lter unit
If dirt does not come off even if the unit is maintained, it is time for the unit to be replaced.
The replacement lter unit (ET-EMF300) is sold separately. To purchase the product, consult your dealer.
Replacement of the air lter unit
Attention
z
Make sure to turn off the power before replacing
the air lter unit.
z
When replacing the unit, make sure that the
projector is stable. Perform the replacement in a
safe place where the projector will not be damaged
even if you drop the air lter unit.
1) Remove the air lter cover.
z
Use a Phillips screw driver to turn the air lter
cover screw (one screw) counterclockwise until it
turns freely, and then remove the air lter cover.
Air filter cover screw
Air filter cover
2) Pull out the air lter unit.
z
Hold the tabs on the air lter unit and pull out
the air lter unit from the projector.
ヶヱ
Air filter unit
Tabs
z
After removing the air lter unit, remove large
foreign objects and dust from the air lter unit
and the projector's air intake port if there are
any.
3) Attach the separately sold replacement
lter unit (ET-EMF300) to the projector.
z
The air lter unit has vertical distinctions. (Check
the direction of the allow
ヶヱ
.)
z
Perform Step 2) in the reverse order.
4) Attach the air lter cover to the
projector. Using a Phillips screwdriver,
tighten the air lter cover screw.
z
Perform Step 1) in the reverse order.
Attention
z
When turning the projector on, make sure that the
air lter unit is installed before using the projector. If
it is not properly installed, the projector will suck in
dirt and dust causing a malfunction which turns the
p
ower off after ten minutes. (The time remaining
before the power is turned off is displayed in one
minute intervals.)
Note
z
The replacement cycle of the air lter unit varies
greatly depending on the usage environment.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW730UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW730UK in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info