543723
82
Zoom out
Zoom in
Previous page
1/132
Next page
82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the rmware of the projector.
[SUB VERSION] Displays the sub version of the rmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT]
[POWER ON TIMES] Displays the number of times the power is turned on.
[LAMP1 ON] Displays the number of times lamp 1 has been turned on.
[LAMP2 ON] Displays the number of times lamp 2 has been turned on.
[SHUTTER] Displays the number of times the shutter function has been used.
[LAMP1] Displays the details of cumulative operating time.
[LAMP2] Displays the details of cumulative operating time.
[NUMBER OF ENTRY SIGNAL] Displays the number of registered signals.
[REMOTE2 STATUS] Displays the control status of the REMOTE2.
[SIGNAL INFORMATION]
[MEMORY NO.] Displays the memory number of the input signal.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[SYNC.STATE] Displays the synch polarity of the input signal.
[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE] Displays the scan type of the input signal.
[TOTAL DOTS] Displays the total dot count of the input signal.
[DISPLAY DOTS] Displays the number of input signal display dots.
[TOTAL LINES] Displays the total line count of the input signal.
[DISPLAY LINES] Displays the number of input signal display lines.
[SAMPLING] Displays the sampling information of the input signal.
* Displays the actual time for the hours used of lamp.
To calculate a rough guide for lamp replacement, convert as follows:
Lamp replacement time =
Cumulative operating time when [LAMP POWER] is set to [NORMAL] + (Cumulative operating time when [LAMP POWER] is set to [ECO] x
5/6)
Note
rf
The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.
rf
Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
rf
The “lighting time” and “usage time” of the lamp displayed in [STATUS] may differ from the actual time if the lamp unit that has been used on
other models than this projector (PT-DW640E/PT-DX610E) is attached and used on the projector, or if the lamp unit that has been used on
this projector (PT-DW640E/PT-DX610E) is attached and used on other projector models.
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically to standby if there is no input signal by the specied time.
1)
Press as to select [NO SIGNAL SHUT-OFF].
2)
Press qw to switch [NO SIGNAL SHUT-OFF].
rr
[NO SIGNAL SHUT-OFF]
[DISABLE] Disables the No signal shut-off function.
[10MIN.] - [90MIN.] Allows you to set in ten minutes intervals.
[FUNCTION BUTTON]
Set the functions of the <FUNCTION> button on the remote control.
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
rf
The [FUNCTION BUTTON] screen is displayed.
3)
Press as to select a function.
4)
Press the <ENTER> button.
rr
Available functions
[DISABLE] Disables the <FUNCTION> button.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info