543723
81
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
6)
Press qw to switch [GROUP].
rf
The setting will change among [A] to [Z] each time you press
the button.
7)
Press as to select [RESPONSE(ID GROUP)].
8)
Press qw to switch [RESPONSE(ID GROUP)].
rf
The setting will change between [ON] and [OFF] each time you
press the button.
rr
[RESPONSE(ID ALL)]
[ON] Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
rr
[GROUP]
[A] - [Z]
Controls multiple projectors simultaneously by sending the ID of RS-232C.
Set the group from [A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
rr
[RESPONSE(ID GROUP)]
[ON] Returns the response when the ID setting is GROUP.
[OFF] Does not return the response when the ID setting is GROUP.
Note
rf
Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (
x
page 121).
[REMOTE2 MODE]
You can set the <REMOTE 2 IN> terminal.
1)
Press as to select [REMOTE2 MODE].
2)
Press qw to switch [REMOTE2 MODE].
rf
The setting will change between [DEFAULT] and [USER] each
time you press the button.
rf
When [USER] is selected, proceed to Step 3).
3)
Press the <ENTER> button.
4)
Press as to select any from [PIN2] to [PIN8]
and press qw to switch the setting.
rf
[PIN1] and [PIN9] cannot be changed.
rr
[REMOTE2 MODE]
[DEFAULT]
The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the projector.
(
x
page 124)
[USER]
The pin assignment of the <REMOTE 2 IN> terminal is used by the setting changed from the factory default
setting of the projector.
[STATUS]
Displays the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
rf
The [STATUS] screen is displayed.
3)
Press qw to switch the pages.
rf
The page will change each time you press the button.
rr
Contents to be displayed
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[PROJECTOR RUNTIME] Displays the operation times of the projector.
[LAMP1]
*
Displays the hours used of lamp 1.
[LAMP2]
*
Displays the hours used of lamp 2.
[INTAKE AIR TEMP.] Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.] Displays the status of the internal temperature of the projector.
[AROUND LAMP TEMP.] Displays the status of the temperature around the lamps of the projector.
[PROJECTOR TYPE] Displays the type of the projector.
[SERIAL NUMBER] Displays the serial number of the projector.
[LAMP UNIT MODEL NO.] Displays the model no. of the lamp unit.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info