598890
73
Zoom out
Zoom in
Previous page
1/129
Next page
DISPLAY OPTION menu
ENGLISH -
73
Settings
Press ◄► to switch [DVI SIGNAL 6 )
LEVEL].
The setting will change as follows each time
z
◄► is pressed.
0-255 : PC 16-235
0-255 : PC
Select this when, for example,
an external device (PC, etc.) is
connected via the DVI terminal
output.
16-235
Select this when, for example, an
external device (DVD player, etc.)
is connected via the HDMI terminal
output using a conversion cable.
Note
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual of the external device.
If the setting is changed, the data for plug and play
z
changes. For the plug and play compatible resolutions,
refer to “List of compatible signals” (
Æ
page 122).
HDMI IN
Change this setting if video does not display normally
when the projector and an external device are
connected via HDMI.
Press ▲▼ to select [HDMI IN].1 )
Press <ENTER> button.2 )
The [
z
HDMI IN] screen will be displayed.
Press ◄► to switch [HDMI SIGNAL 3 )
LEVEL].
The setting will change as follows each time
z
◄► is pressed.
0-1023 64-940
0-1023
Select this when, for example, a DVI
terminal output of an external device
(PC etc.) is connected to HDMI IN
using a conversion cable, etc.
64-940
Select this when, for example,
an HDMI terminal output of an
external device (DVD player, etc.) is
connected to HDMI IN.
Note
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual for the external device.
The displayed HDMI signal level is the value when the
z
input is 30 bit.
SDI IN
(PT-DZ8700U/PT-DS8500U only)
You can select signal amplitude type.
Available with YP
B
P
R
or RGB of HD-SDI signal.
Press ▲▼ to select [SDI IN].1 )
Press <ENTER> button.2 )
The [
z
SDI IN] screen will be displayed.
Press ◄► to switch [SDI SIGNAL 3 )
LEVEL].
The setting will change as follows each time
z
◄► is pressed.
64-940 4-1019
64-940 Normal setting
4-1019
For when grey color is too close to
black
ON-SCREEN DISPLAY
The user can specify the on-screen display.
Press ▲▼ to select [ON-SCREEN 1 )
DISPLAY].
Press <ENTER> button.2 )
The [ON-SCREEN DISPLAY] screen will be
z
displayed.
Press ▲▼ to select the desired item, 3 )
and press ◄► to change the setting.
J
OSD POSITION
This sets the position of the on-screen display
(OSD).
2 (Left center
of the screen)
3 (Bottom left
of the screen)
4 (Top center
of the screen)
1 (Top left
of the screen)
5 (Center
of the screen)
9 (Bottom right
of the screen)
6 (Bottom center
of the screen)
8 (Right center
of the screen)
7 (Top right
of the screen)
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info