598890
72
Zoom out
Zoom in
Previous page
1/129
Next page
DISPLAY OPTION menu
72
- ENGLISH
Settings
J
Adjusting the position
automatically
Select [POSITION ADJUST] in step 3).1.
Press ◄► to switch [POSITION 2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
Screen position and size are
adjusted during AUTO SETUP
operation.
J
Adjusting the signal level
automatically
Select [SIGNAL LEVEL ADJUST] in 1.
step 3).
Press ◄► to switch [SIGNAL LEVEL 2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
The black level (On-screen menu
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
If the input image is not a still image with a clear
z
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.
RGB IN
(Only RGB input)
Change this setting to change the input impedance of
the synchronous signal input.
Press ▲▼ to select [RGB IN].1 )
Press <ENTER> button.2 )
The [
z
RGB IN] screen will be displayed.
Press ▲▼ to select [RGB1 SYNC 3 )
TERMINAL] or [RGB2 SYNC
TERMINAL].
Press ◄► to switch.4 )
The setting will change as follows each time
z
◄► is pressed.
LOW HIGH
LOW Input impedance is set to [LOW].
HIGH Input impedance is set to [HIGH].
DVI-D IN
Change this setting if video does not display normally
when the projector and an external device are
connected via DVI.
Press ▲▼ to select [DVI-D IN].1 )
Press <ENTER> button.2 )
The [
z
DVI-D IN] screen will be displayed.
Press ▲▼ to select [DVI EDID].3 )
Press ◄► to switch [DVI EDID].4 )
The setting will change as follows each time
z
◄► is pressed.
EDID3 EDID1 EDID2 : PC
EDID3
Switch between ne settings for a
moving image and for a still image.
EDID1
Mainly select this when an external
device (DVD player, etc.) for
outputting video signals of a moving
image system is connected to DVI-D
IN.
EDID2 : PC
Mainly use this when an external
device (PC, etc.) for outputting video
signals of a still image system is
connected to DVI-D IN.
Press ▲▼ to select [DVI SIGNAL 5 )
LEVEL].
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info