598890
47
Zoom out
Zoom in
Previous page
1/129
Next page
Basic operations using the remote control
ENGLISH -
47
Basic Operation
Automatic adjustment
The automatic setup function can be used to
automatically adjust the resolution, clock phase and
picture position when analog RGB signals consisting
of bitmap images such as computer signals are being
input, or to automatically adjust the picture position
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright
white frame at the outermost periphery containing
characters etc. that are clear in white and black
contrast when the system is in automatic adjustment
mode.
Avoid supplying images that involve halftones
or gradation such as photographs and computer
graphics.
button
Press <AUTO SETUP> button on the
remote control or the main unit.
A message [COMPLETE] appears if adjustment is
z
ended normally.
Note
[CLOCK PHASE] may have been shifted even when the
z
adjustment ended normally. In this case, manually adjust
the [CLOCK PHASE].
Refer to “CLOCK PHASE” of “POSITION menu”
(
Æ
page 60) for details.
If an image with blurred edges or a dark image is input,
z
[INCOMPLETE] may appear or adjustment may not
be performed properly even if [COMPLETE] appears.
In this case, manually adjust the items of “INPUT
RESOLUTION” of “ADVANCED MENU” (
Æ
page 64),
“SHIFT” and “CLOCK PHASE” of “POSITION menu”
(
Æ
pages 58, 60).
For specic signals, adjustment should be made
z
according to “AUTO SETUP” of “DISPLAY OPTION
menu” (
Æ
page 71).
[AUTO SETUP] may not be available depending on the
z
machine type of the personal computer.
Automatic adjustment may not available for
z
synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during
z
automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.
z
Automatic adjustment can be canceled by pressing
z
<MENU> button during the course of automatic
adjustment.
Even for an RGB signal for which automatic setup is
z
possible, if automatic setup is performed while moving
images are being input, [INCOMPLETE] may appear,
or adjustment may not be performed properly even if
[COMPLETE] appears.
Using the FUNCTION button
[DISABLE], [SUB MEMORY], [SYSTEM SELECTOR],
[SYSTEM DAYLIGHT VIEW], [FREEZE], [P IN P],
or [WAVEFORM MONITOR]
Û
operations can be
assigned to <FUNCTION> button on the remote
control so that it can be used as an easy shortcut
button.
button
Press <FUNCTION> button on the remote
control.
PT-DZ8700U only:
Û
Note
Refer to
z
“FUNCTION BUTTON” of “PROJECTOR SETUP
menu” (
Æ
page 84) for details.
Displaying the internal
test pattern
The projector has 9 types of internal test patterns to
check the condition of the set.
To display test patterns, follow the steps below.
button
Press <TEST PATTERN> button.1 )
Press ◄► to select [TEST PATTERN].2 )
Note
Setting is also possible by using an on-screen menu.
z
Refer to “TEST PATTERN menu” (
Æ
page 88) for details.
Adjustment of the image, picture quality, position, size
z
and other factors will not be reected in test patterns. Be
sure to display an actual input signal before performing
these adjustments.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info