532618
122
Zoom out
Zoom in
Previous page
1/186
Next page
[SIGNAL LIST] menu
122 - ENGLISH
Settings
Protecting the registered data
1) Press
󱚣󱚤
to select the signal to
protect.
2) Press the <ENTER> button.
z
The [REGISTERED SIGNAL STATUS] screen
is displayed.
3) Press the <ENTER> button.
z
The [REGISTERED SIGNAL SETUP] screen is
displayed.
4) Press

to select [LOCK].
5) Press
󱚣󱚤
to switch [LOCK].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF] The signal is not protected.
[ON] The signal is protected.
Note
z
When [LOCK] is set to [ON], signal delete, image
adjustment and auto setup are not available. To
perform these operations, set [LOCK] to [OFF].
z
A signal can be registered to sub memory even if it
is protected.
z
Even a protected signal will be deleted if
[INITIALIZE] is executed.
Expanding signal lock-in
range
1) Press
󱚣󱚤
to select the signal to
set.
2) Press the <ENTER> button.
z
The [REGISTERED SIGNAL STATUS] screen
is displayed.
3) Press the <ENTER> button.
z
The [REGISTERED SIGNAL SETUP] screen is
displayed.
4) Press

to select [LOCK-IN RANGE].
5) Press
󱚣󱚤
to switch [LOCK-IN
RANGE].
z
The setting will change as follows each time
you press the button.
[NARROW] [WIDE]
[NARROW] Select in most cases.
[WIDE] Widens the lock-in range.
Note
z
Switch the range that determines that a signal to be
input is the same signal that is already registered.
z
To prioritize the determination that it is the same
signal that is already registered, set to the [WIDE]
setting.
z
Use in cases such as when the synchronizing
frequency of a signal to be input has changed
slightly, or multiple signal lists are registered.
z
Can only be used when a signal is input from
the <RGB 1 IN> terminal, <RGB 2 IN> terminal,
<DVI-D IN> terminal, or <HDMI IN> terminal.
z
When [WIDE] is set, the image may appear
distorted because a signal is determined to be the
same signal even if a synchronizing frequency
changes slightly.
z
When a signal to be input corresponds to the
signal set in [WIDE], a registered signal with a high
memory number receives priority. Example: a signal
to be input that corresponds to memory numbers
A2, A4 and B1 will be determined to be B1.
z
When a registration signal is deleted, the settings
are also deleted.
z
In an environment where multiple types of signals
are input to the same terminal, signals are
sometimes not determined correctly when settings
are set to [WIDE].
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KU in the language / languages: English as an attachment in your email.

The manual is 18,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KU

Panasonic PT-DS20KU User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info