532618
121
Zoom out
Zoom in
Previous page
1/186
Next page
[SIGNAL LIST] menu
ENGLISH - 121
Settings
Select [SIGNAL LIST] from the main menu.
Refer to Navigating through the menu
(
page 63) for the operation of the menu
screen.
Registered signal status
z
A name can be set for each sub memory
(
page 123).
z
Memory number: A1 (1-2)
Sub memory number
When the address number (A1, A2, ... H7, H8)
is registered
Registering a signal to the list
After a new signal is input and the <MENU> button
on the remote control or the control panel is pressed,
the registration is completed and the [MAIN MENU]
screen is displayed.
Note
z
Up to 96 signals, including sub memories, can be
registered to the projector.
z
There are 12 pages (eight memories of A through
L, with eight memories possible on each page) for
memory numbers, and it is registered to the lowest
number that is available. If there is no available
memory number it will be overwritten from the
oldest signal.
z
The names to be registered are automatically
determined by the input signals and memory
numbers.
z
If a menu is being displayed, the new signals will
be registered at the instant they are input.
Renaming the registered data
1) Press
󱚣󱚤
to select the signal for
which details are to be displayed.
2) Press the <ENTER> button.
z
The [REGISTERED SIGNAL STATUS] screen
is displayed.
z
The name, memory number, input terminal,
frequency, synchronization signal, etc., of the
input signal are displayed.
z
Press the <MENU> button to return to the
[REGISTERED SIGNAL LIST] screen.
3) Press the <ENTER> button.
z
The [REGISTERED SIGNAL SETUP] screen is
displayed.
4) Press

to select [SIGNAL NAME
CHANGE].
5) Press the <ENTER> button.
z
The [SIGNAL NAME CHANGE] screen is
displayed.
6) Press
󱚣󱚤
to select the text, and
press the <ENTER> button to enter the
text.
7) After the name is changed, press
󱚣󱚤
to select [OK], and press the
<ENTER> button.
z
The registration is completed and it will return
to the [REGISTERED SIGNAL SETUP] screen.
z
When pressing
󱚣󱚤
to select [CANCEL]
and pressing the <ENTER> button, the
changed signal name will not be registered and
an automatically registered signal name will be
used.
Deleting the registered data
1) Press
󱚣󱚤
to select the signal to
delete.
2) Press the <DEFAULT> button.
z
The [ENTRY SIGNAL DELETE] screen is
displayed.
z
To cancel the deletion, press the <MENU>
button to return to the [REGISTERED SIGNAL
LIST] screen.
3) Press the <ENTER> button.
z
The selected signal will be deleted.
Note
z
A signal can also be deleted from [ENTRY SIGNAL
DELETE] on the [REGISTERED SIGNAL SETUP]
screen.
[SIGNAL LIST] menu
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KU in the language / languages: English as an attachment in your email.

The manual is 18,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KU

Panasonic PT-DS20KU User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info