136256
24
Zoom out
Zoom in
Previous page
1/30
Next page
24
To Find the Beginning of Each Recording
(VHS Index Search System)
This VCR automatically records special index signals on the
tape every time a recording is started. The Index search
function makes use of these index signals to let you find the
beginning of a desired programme quickly and easily.
Index signals are automatically recorded in the following
cases:
When you start a recording by pressing the REC button I,
REC/OTR button Z, or DIRECT REC button Q.
When a timer recording starts.
When you press the REC button I on the remote control
during recording.
Conditions for correct operation of the Index search function:
The VCR must be in the stop mode or in the playback
mode.
Each programme recorded on the tape must be at least
5 minutes long.
Preparations
Display the VCR picture on the TV.
Insert a recorded video cassette.
Operation
1 Press the INDEX button L (that corresponds to the
direction from the current tape position in which the
desired programme is located on the tape) to start the
index search.
For example, if you want to
search for the 2nd recorded
programme in forward direction,
press the INDEX L button L
twice.
The VCR fast-forwards or rewinds the tape and
searches for the specified index signal (the beginning of
the desired recorded programme).
When it has been found, playback starts automatically.
Erased
Programme 1 Programme 2
New programme
Within 10 minutes
Programme 3
Erased
Programme 1 Programme 2
New programme
Within 10 minutes
Programme 3
Not erased
Programme 1 Programme 2
New programme
10 minutes or more
Programme 3
To Demonstrate the Jet Navigator Function
Keep the NAVI button 4 pressed for more than 5 seconds
without inserting a cassette tape.
To Check the Recorded Programming Data
(Time Stamp Function)
When playback starts after searching
with Jet Navigator function or index
search function, recorded
programming data (called Time
Stamp) appears on the TV screen for
approx. 5 seconds.
When Recording Over the Same Location on a Tape:
The originally recorded programme is deleted from the list.
Programme contents starting near the start and end of the
newly recorded programme (within 10 minutes before the
start and after the end of the newly recorded programme)
are also erased.
(Although old programme contents are also similarly erased
in the case of ordinary recording, the newly recorded
programme is not registered in the list.)
Preparation
Display the VCR picture on the TV.
Note:
Time Stamp does not appear if the beginning of the Jet
Navigator data are not recorded 10 minutes before and
after the current tape position even when index signals are
recorded.
CH 2
10/27. SA
ON 20:02
On Screen Display
To Cancel the Index Search or to Stop Playback:
Press the Stop button F.
Notes:
Searching in either direction is possible up to the 20th
index signal.
If you press either of the INDEX button L too many times,
simply press the other INDEX button L (indicating the
opposite direction) to correct it. In this way, you can reduce
the displayed figure down to 1.
The figure on the VCR display decreases by 1 every time
an index signal is located.
VCR display
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj730 eg s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj730 eg s in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info