53250
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
DATE
r
s
SP/LP/EP
If [ ––] Appears under [Pos/Name] after
Entering a ShowView Number
Pos/Name stands for Programme Position/TV Station Name.
Normally, the name of the TV station or the number of the
programme position is displayed under [Pos/Name].
However, if the [––] indication appears, follow the operation
steps below.
Press the [Channel] button repeatedly to select the
programme position on which the TV programme to be
recorded will be broadcast.
After you have entered the information of a TV station, it
remains stored in the VCRs memory, and you do not need to
enter it again in the future.
Setting the Recording Date/Day(s)
Press the [DATE] button to select the recording date
(1 to 31), daily timer recording date (SuSa, MoSa or
MoFr) or weekly timer recording date (Su to Sa).
Programming a timer recording (setting the date) is
possible up to one month ahead of the TV programmes
broadcasting date and time. Daily and weekly timer
recordings will continue until you cancel them.
Auto SP/LP Change Function
(For NV-FJ620 Series, NV-FJ621 Series and NV-FJ616
Series)
If the VCR determines that the remaining tape time is
insufficient to record the whole programme, LP mode is
automatically selected to ensure that the programme will be
recorded as long as possible.
Press the [SP/LP/EP] button to select [A].
This function cannot change the recording speed to the EP
mode.
If the remaining tape time is still not sufficient even in the
LP mode, the programme cannot be recorded to its end.
If the recording speed changes from SP to LP during a
timer recording, some brief picture distortion occurs at that
point.
VPS/PDC Function
If a TV programme, for example a football game runs longer
than scheduled, is shortened or starts earlier or later, this
function synchronises the recording start and stop with the
actual broadcasting start and stop of the TV programme.
Press the [Cursor] buttons 3421 to make the [ON]
indication appear.
[ON] must be displayed under [VPS/PDC] on the TV
screen.
The TV station must broadcast VPS/PDC signals.
The programme starting time must be set correctly to the
starting time listed in the newspaper/magazine.
To Check, Change or Cancel Timer
Recording Programmings
Press the [PROG./CHECK] button to display the timer
recording programmings on the TV screen.
When the VCR is in the timer recording standby mode
for a VPS/PDC recording, the On Screen Display may
be distorted.
Press the [Cursor] buttons 34 to select the
programming that you want to change or cancel.
To change or cancel timer recording programmings, use
the [Cursor] buttons 3421, the [Channel], [DATE],
[ON], [OFF] or [CANCEL] button.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Note:
In some cases, for example as listed below, the programming
of a timer recording remains stored in the memory until 4 a.m.
the next day. However, this is not a malfunction.
When a timer recording was not performed up to the TV
programmes ending time because the remaining tape time
was not sufficient.
When you have stopped the timer recording while it was
being performed.
To Check the Total Timer Recording
Programming Time
The total time indication for timer
recording programming lets you check
how many programmes can be
recorded by comparing with the
remaining tape time in the VCR
display.
The total time is calculated in the SP mode.
The total time cannot be calculated when setting Daily/
Weekly timer recording.
OK
EXIT
PROG. / CHECK
1.
2. jjjjj jj/jj jj:jj jj:jj jj jjj
3. jjjjj jj/jj jj:jj jj:jj jj jjj
4. jjjjj jj/jj jj:jj jj:jj jj jjj
5. jjjjj jj/jj jj:jj jj:jj jj jjj
6. jjjjj jj/jj jj:jj jj:jj jj jjj
7. jjjjj jj/jj jj:jj jj:jj jj jjj
8. jjjjj jj/jj jj:jj jj:jj jj jjj
1
Total (SP) 90min
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-FJ616 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-FJ616 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NV-FJ616

Panasonic NV-FJ616 User Manual - German - 25 pages

Panasonic NV-FJ616 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info