53250
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
1
2
3
4
5
6
1
2
3
EXT LINK
EXT LINK
Satellite or Digital Receiver
Connecting the VCR to a Satellite Receiver
or Digital Receiver
If the satellite receiver is equipped with a 21-pin scart socket
Connect your VCR to a TV using only RF coaxial cable.
(For NV-SJ220 Series) (See page 7.)
1 Satellite receiver (not supplied)
2 21-pin Scart socket
If your satellite receiver has a VCR socket, connect the cable to it.
3 21-pin Scart cable (not supplied)
Set [AV2] to [EXT], [EXT LINK 1] or [EXT LINK 2].
(For NV-FJ620 Series, NV-FJ621 Series and NV-FJ616
Series)
Set [AV] to [TV/EXT], [EXT LINK 1] or [EXT LINK 2].
(For NV-SJ220 Series)
For details, see page 18.
If the satellite receiver is not equipped with a 21-pin scart
socket
1 Satellite receiver (not supplied)
2 Aerial Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 RF coaxial cable (not supplied)
Hint:
The RF output channel of the satellite receiver should be
adjusted away from channel 36, which is used by the VCR,
e.g. re-adjust to channel 33.
Linked Timer Recordings by External
Equipments (EXT LINK)
If an external equipment (for example a satellite receiver) with
a timer function is connected to the AV socket of this VCR by
a 21-pin cable, it is possible to control the recording of the
VCR from this equipment.
Make sure that [AV2] is set to [EXT LINK 1] or [EXT
LINK 2]. (For NV-FJ620 Series, NV-FJ621 Series and
NV-FJ616 Series)
Make sure that [AV] is set to [EXT LINK 1] or [EXT
LINK 2]. (For NV-SJ220 Series) (See page 18.)
Timer programming has to be done on the external
equipment and switch to the timer recording standby
mode, refer to its operating instructions.
Press the [EXT LINK] button on the VCR to switch the
VCR over to the timer recording standby mode.
As long as a video picture is
being trasmitted by the Satellite
or Digital Receiver, the VCR will
record it.
This notice is displayed on the
TV screen.
To delete it, press the [OK]
button.
To cancel the external control, turn off the timer
recording standby mode of the VCR by pressing the
[EXT LINK] button again.
Notes:
To switch TV automatically to the picture from the VCR in
playback mode, connect the AV1 socket of this VCR to the
TV by a 21-pin cable. (For NV-FJ620 Series, NV-FJ621
Series and NV-FJ616 Series)
Some external equipments may not work with this function,
refer to its operating instructions.
VCR now recording
this programme
OK
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-FJ616 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-FJ616 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NV-FJ616

Panasonic NV-FJ616 User Manual - German - 25 pages

Panasonic NV-FJ616 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info