135564
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Linked Timer Recordings by External
Equipments (EXT LINK)
If an external equipment (for example a satellite receiver)
with a timer function is connected to the AV socket of this
VCR by a 21-pin cable, it is possible to control the recording
of the VCR from this equipment.
Make sure that [AV2] is set to [EXT LINK 1] or [EXT LINK 2].
(For NV-FJ732EE and NV-FJ632EE)
Make sure that [AV] is set to [EXT LINK 1] or [EXT LINK 2].
(For NV-FJ628EE) (See page 20.)
Timer programming has to be done and switch to the timer
recording standby mode on the external equipment, refer to
its operating instructions.
1) Press the [EXT LINK] (45) on the VCR to switch the VCR
over to the timer recording standby mode.
As long as a video picture is
being transmitted by the Satellite
or Digital Receiver, the VCR will
record it.
This notice is displayed on the
TV screen.
(Only when [EXT LINK 2] is
selected)
To delete it, press the [OK] (24).
2) To cancel the external control, turn off the timer recording
standby mode of the VCR by pressing the [EXT LINK]
(45) again.
Notes:
To switch TV automatically to the picture from the VCR in playback
mode, connect the AV1 socket of this VCR to the TV by a 21-pin
cable. (For NV-FJ732EE and NV-FJ632EE)
Some external equipments may not work with this function, refer to
its operating instructions.
Connecting a Stereo Amplifier
(For NV-FJ732EE and NV-FJ632EE)
1 Audio cable (not supplied)
2 Stereo amplifier (not supplied)
3 Audio Input sockets
1) Connect an Audio cable (not supplied) to the Audio
Output sockets on the VCR and to Audio Input sockets
on the stereo amplifier.
2) Connect the stereo amplifiers mains lead to an AC mains
socket.
Connecting a Decoder
(For NV-FJ732EE and NV-FJ632EE)
Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).
1 Decoder (not supplied)
2 21-pin Scart socket
3 21-pin Scart cable (not supplied)
1) Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket on the VCR and to the 21-pin Scart
socket on the decoder.
2) Connect the decoders mains lead to an AC mains
socket.
3) Set [AV2] to [DECODER].
For details, see page 20.
AV Link Function
If the VCR is connected to the TV via a 21-pin Scart cable,
you can use the [AV LINK] (35) to switch the TV from normal
TV reception over to the video playback channel (AV input)
(and vice versa). In the VCR mode (when the [VCR]
indication in the VCR display is lit), the TV is switched to the
video playback channel (AV input). In the TV mode (when
the [VCR] indication is not lit), the TV is switched to TV
reception.
When you press the [MENU] (7) to display the menu on
the TV screen, the TV is also automatically switched to the
VCR mode, however, the [VCR] indication does not appear
in this case.
When you start playback on the VCR, the TV is
automatically switched to the VCR mode. However, during
playback, it is not possible to switch the TV back to the TV
mode.
If a Pay TV station has been selected on the VCR when
you switch to the TV mode, the picture on the TV is
scrambled when you select a Pay TV station on the TV. In
this case, either switch to the VCR mode or select the AV
input on the TV.
Hint:
[RGB] means separate Red/Green/Blue colour signals. If you
connect a TV equipped with RGB input capability to the AV1
socket on this VCR, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal input
from the decoder via the VCR.
VCR now recording
this programme
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj 628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 628 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info