135564
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
Recording from an external source
Recording from an external source, for example from a video
movie camera, can be performed.
Connect your VCR to a TV using only RF coaxial cable.
(For NV-FJ628EE) (Seepage 8.)
Connect a video movie camera or a VCR to this VCR, as
shown in the illustration.
Press the [INPUT SELECT] (3) to select the AV Input
according to the socket on the VCR to which the source
unit has been connected.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
(For NV-FJ732EE and NV-FJ632EE)
Make sure that [AV2] is set to [EXT]. (See page 20.)
A3: When connected to the Video Input socket and Audio
Input sockets on the front panel of the this VCR
(For NV-FJ732EE)
Use the L connector for operations in the normal
(monaural) mode.
(For NV-FJ628EE)
AV: When connected to the AV1 21-pin Scart socket
Make sure that [AV] is set to [TV/EXT]. (See page 20.)
1) Press the [Play] (26) to start playback.
2) At the point where you want to join a new scene, press
the [Pause/Slow] (29) to put it in the still playback mode.
3) Press the [REC] (28) to put it in the recording pause
mode.
If you leave the VCR in the recording pause mode for
more than 5 minutes, the VCR automatically switches
over to the stop mode to protect the video heads.
4) Start playback on the source unit and search for the point
from which you want to record (copy) onto this VCR.
5) When that point is reached, press the [Pause/Slow] (29)
again to start recording the new picture and sound from
the playback unit.
6) To record (copy) additional scenes, press the [Pause/
Slow] (29) to put this VCR in the recording pause mode
and then perform above step again.
7) At the point where you want to stop recording, press the
[Stop] (9) to finish recording.
Hint:
The new sound is recorded on both the Hi-Fi audio tracks and the
normal audio track. The sound recorded on the normal audio track
is always in mono.
Satellite or Digital Receiver
Connecting the VCR to a Satellite
Receiver or Digital Receiver
If the satellite receiver is equipped with a 21-pin scart socket
Connect your VCR to a TV using only RF coaxial cable.
(For NV-FJ628EE) (See page 8.)
1 Satellite receiver (not supplied)
2 21-pin Scart socket
If your satellite receiver has a VCR socket, connect the cable to it.
3 21-pin Scart cable (not supplied)
Set [AV2] to [EXT], [EXT LINK 1] or [EXT LINK 2].
(For NV-FJ732EE and NV-FJ632EE)
Set [AV] to [TV/EXT], [EXT LINK 1] or [EXT LINK 2].
(For NV-FJ628EE)
For details, see page 20.
If the satellite receiver is not equipped with a 21-pin scart
socket
1 Satellite receiver (not supplied)
2 Aerial Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 RF coaxial cable (not supplied)
Hint:
The RF output channel of the satellite receiver should be adjusted
away from channel 38, which is used by the VCR, e.g. re-adjust to
channel 33.
AV3 IN
INTELLIGENT TIMER
AV2
(
DECODER/DECODEUR/EXT
)
AV1
(
TV
)
VIDEO
L/MONO
AUDIO
R
Video movie camera
Other VCR
(42) (43) (51) (52)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj 628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 628 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info