135537
7
Zoom out
Zoom in
Previous page
1/16
Next page
Switch on the TV to the video output channel, insert a cassette with an
intact erasure prevention tab into the VCR and set the remote control
to VCR operation.
n Press
n Enter the ShowView number.
For correction use
8
.
n To access [Timer recording], press
o
.
n If the channel name is not set
automatically, select your Channel [Pos]
:;
and store with
o
.
The name of channel will be saved.
To modify the [Name], see page 10.
n Set the Tape Speed
SP, LP, EP or A (automatic).
n Check the Remaining tape time.
n To store the programme, press
o
.
&
To preset other recordings
repeat the procedure.
n Press to switch the VCR
to Standby mode. Make sure that
the VCR display
i
appears.
For more information, see page 6.
7
To cancel Standby mode for Timer recording,
press and the VCR display
i
will disappear..
Now you can playback a cassette or make a recording.
After that, you must press the button again to switch
the VCR to the Standby mode for Timer recording.
Programme List
The List of the Timer recordings are stored if:
n the recordings are longer than 15 minutes (EP mode 25 minutes)
n the cassette was not removed of the VCR.
n Press to display the [Programme List].
n Select the programme
:;
.
n By pressing the SEARCH Button again, the VCR will wind
the tape to the selected programme and start to playback.
n If you select another programme, press the SEARCH Button again,
the playback will stop and the [Programme List] will appear.
n Press to quit the menu.
Note:
If you have removed the cassette, or the power supply
was interrupted, the Intro Jet Scan will be activated when pressing
the SEARCH Button (see page 8).
To check the Timer recording,
n press to display the [Timer recording] menu.
n Press to quit the menu.
To delete or change a Timer recording,
n press to display the [Timer recording] menu.
n Use
:;
to select the entry to be changed.
n Press to delete the Timer recording.
n Use the relevant function buttons
to change the entries.
n Press
o
to store these changes.
n Press to quit the menu.
Timer Recording with ShowView (not for NV-FJ623)
Panasonic VCR
Programme List
Pos
Name Date Start
1.
***
01 27/10 17:44
2.
***
01 28/10 15:00
Panasonic VCR
Timer recording 1/2
Pos Start Stop VPS
Name DATE ON OFF PDC
1. ARD 20/9 15:00 16:00 SP ON
2.- - - - - - -/- - - -:- - - -:- - - - - - -
3. - - - - - - -/- - - -:- - - -:- - - - - - -
Panasonic VCR
Show View
8 3 5 4 2 - - - -
Panasonic VCR
Timer recording 1/2
Pos Start Stop VPS
Name DATE ON OFF PDC
1. - - - - - - - 15:00 16:00 SP - - -
2. - - - - - - -/- - - -:- - - -:- - - - - - -
3. - - - - - - -/- - - -:- - - -:- - - - - - -
Recording
Recording with Intelligent Timer Function
To set easily the Timer for programmes often broadcasted on the same
channel and time each day (for example series), the Intelligent Timer
Function remembers the channel number along with the start and end times
of the last 8 programmes that you have recorded using Timer Recording.
n Press
n To select the programme
:;
n Press to switch the VCR
to Standby mode for Timer recording.
If you want to modify the data first, follow the next steps.
n If more than 8 programmes are stored, the oldest
data will be lost. To delete recording data manually, press .
n To protect a programme press
9
and the lock symbol will appear..
To unlock a programme press
8
.
n To modify the data, press o and Timer recording Menu will appear.
n Change the data
:;8 9
.
n Press to switch the VCR
to Standby mode for Timer recording.
For more information, see page 6.
Panasonic VCR
INTELLIGENT TIMER 19/10/01
Pos VPS
Name Date Start Stop PDC
Panasonic VCR
Timer recording 1/2
Pos Start Stop VPS
Name DATE ON OFF PDC
1. ZDF 12/11 15:00 16:00 SP ON
2.- - - - - - -/- - - -:- - - -:- - - - - - -
3. - - - - - - -/- - - -:- - - -:- - - - - - -
Note:
n These functions can be also
used with the VCR buttons: ,
n When [Shipping condition], [Auto - Setup Restart] etc. is done,
Intelligent Timer data will be lost.
n To use Intelligent Timer Function, at least one timer recording has to be done.
ARD 20/10 15:00 16:00 SP ON
ZDF 21/10 15:00 16:00 SP ON
is a trademark of Gemstar Development Corporation. The
system is manufactured under licence from Gemstar Development Corporation.
=
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj 623 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 623 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic nv fj 623

Panasonic nv fj 623 User Manual - English - 4 pages

Panasonic nv fj 623 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info