135537
6
Zoom out
Zoom in
Previous page
1/16
Next page
OTR Function
(OTR = One Touch Recording)
To record for a specific length of time,
press this button on the VCR.
You can extend the recording time
from 30, 60, 120, 180 to 240 minutes
by pressing the button repeatedly. To stop in advance press
``
.
The selected length of recording time will appear on the VCR display.
With the On Screen Menu you can programme
Timer recordings (up to 16 programmes).
Switch on the TV to the video output channel, and insert
a cassette with an intact erasure prevention tab into the VCR.
Set the remote control to VCR operation.
Recording
VQT9524
6
n Switch on the VCR
n Press to display
[Timer recording] menu
n Set the channel
You can use the cursors
:;8 9
on the remote control to move around the menu,
in order to make changes.
n Set the recording date, day or week. For example:
Sa means that the programme will be recorded
every Saturday, or Mo - Sa means that the programme
will be recorded every day from Monday to Saturday.
Su=Sunday, Mo=Monday, Tu=Tuesday, We=Wednesday,
Th=Thursday, Fr=Friday, Sa=Saturday
n Set the start time.
If you keep this button pressed down,
the time will change in 30 minute jumps.
n Set the stop time.
n Set the Tape Speed SP/LP/EP or A (automatic).
See also the description for Recording.
n In the setting A (automatic), the VCR automatically switches
(with a short picture distortion) to the slow tape speed LP,
to record the programme as long as possible .
n The preset [VPS / PDC] settings, can be manually changed
(for NV-FJ631, NV-FJ630, NV-FJ626).
[ON] The broadcaster is providing VPS / PDC signals.
If the program is starting earlier or later than planned
the timer recording will be synchronised
to the actual broadcast start.
Important ! The time and the date settings must be exact
same as programme information (programme magazine).
If there is an special VPS / PDC time noted, it must be used.
(The recording can not start, if the settings are not exact.)
[- - -] The broadcaster is not providing VPS / PDC signals.
[OFF] The broadcaster is providing VPS / PDC signals,
but the function is set off.
With this settings you have to add to the start and stop time,
that the whole film can be recorded completely,
in case the film is broadcasted out of the planned start time.
n To check the Remaining tape time,
look at the VCR display REMAIN.
Make sure that the remaining time
on the cassette is longer than the time set for recording,
otherwise the whole programmes cannot be recorded.
n To store the programme, press
o
.
n In order to preset other recordings, repeat this procedure.
n Press to switch the VCR
to Standby mode for Timer recording.
Make sure that the VCR display
i
appears.
n Switch on the TV to the video output channel, and insert
a cassette with an intact erasure prevention tab into the VCR.
n Before recording, select the channel.
Select the AV channel if you
want to record a programme
fed with a 21-pin Scart cable.
n Press to start recording.
n Press the Stop Button
``
to stop recording.
n Use button to pause recording.
n Restart recording by pressing this button again.
To preserve the video heads, the function
will be switched off after 5 minutes.
Note:
These functions can be also used with the VCR buttons:
(rec), (pause), (stop) and (channel)
VCR display
Erasure prevention of a cassette
To prevent the accidental erasure of a cassette,
remove the erasure prevention tab.
If you want to record again on a cassette
with erasure prevention, and this
symbol
f
is flashing on the VCR display,
then cover the hole with adhesive tape.
If you want to watch another TV programme at the same time
as you are recording, select the channel on the TV.
Tape Speed
Press this button before recording, in order to select
the tape speed for the recording.
The following information appears on the VCR display :
SP standard recording time: optimum picture quality.
LP double recording time: slightly reduced picture quality.
EP (SUPER LP) triple recording time: slightly reduced picture quality.
Note:
Distorted pictures produced when playing back some cassettes
(e.g. type E300) after LP or EP recordings are not functional faults.
Timer Recording with On Screen Menu
Direct TV Recording (for NV-FJ631, NV-FJ630, NV-FJ626)
This button allows you to immediately start recording the
same programme that you are viewing on the TV, if your TV is equipped
with Q Link or with a similar function from other manufacturers (see page 3)
and connected with a fully-wired 21-pin Scart cable (not supplied).
Panasonic VCR
Timer recording 1/2
Pos Start Stop VPS
Name DATE ON OFF PDC
1.
***
32 Mo-Sa 13:30 14:00 LP ON
2.
***
32 20/9 15:00 16:00 SP OFF
3. - - - - - - -/- - - -:- - - -:- - - - - - -
Recording
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj 623 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 623 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic nv fj 623

Panasonic nv fj 623 User Manual - English - 4 pages

Panasonic nv fj 623 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info