734754
27
Zoom out
Zoom in
Previous page
1/35
Next page
– 27 –
To Select Pitch of Tone
There are 3 options for the pitch of tone at the end of the heating cycle.
: Low, : Normal (Factory Setting), : High
7. Within 3 seconds after touching Prog Pad at Step 6, touch Start Pad.
A. “PROG” will start to blink.
B. Current pitch of tone will be displayed.
C. The display changes to ”, “ ”, and “ each time Start Pad is touched and
the settings change (Under the “bE” in “bEEP”).
8. When the desired pitch of tone has been selected, touch Prog Pad again.
“PROG” will stop blinking, and the set pitch of tone at the end of heating cycle
will appear for 3 seconds. Then “0” will appear.
To proceed to set pitch of filter cleaning alarm, touch Start Pad before “0” is
displayed after Step 8.
To Select Pitch of Filter Cleaning Alarm
There are 3 options for the pitch of the filter cleaning alarm.
: Low, : Normal (Factory Setting), : High
9. Within 3 seconds after touching Prog Pad at Step 8, touch Start Pad.
A. “PROG” will start to blink.
B. Current pitch of filter cleaning alarm will be displayed.
C. The display changes to ”, “ ”, and “ each time Start Pad is touched and
the settings change (Under the “EP” in “bEEP”).
10. When the desired pitch of filter cleaning alarm has been selected, touch Prog
Pad again.
“PROG” will stop blinking, and the set pitch of filter cleaning alarm will appear for
3 seconds. Then “0” will appear.
Note: When the programmed hour of cleaning Air Filter is “0”, the pitch of filter
cleaning alarm can not be selected.
N. Procedure to Program the Air Filter Cleaning Cycle
The oven can not be programmed until the program lock feature is deactivated.
(See page 24, K. To Deactivate Program Lock.)
1. Open the door and leave it open.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
2. While touching Start Pad, touch Number Pad “7”.
To Program the First Stage
3. The display will show the length of time (in hours) between cleaning the Air Filter
you have programmed in or the original time preset by the manufacturer.
(Continued on next page.)
How to Operate
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-1878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-1878 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info