734754
26
Zoom out
Zoom in
Previous page
1/35
Next page
– 26 –
M. To Select Beep Tone Options
The oven can not be programmed until the program lock feature is deactivated.
(See page 24, K. To Deactivate Program Lock.)
The beep tone can be set for loudness(4 Levels), length of tone(3 Options), pitch of tone—(3 Options)
and pitch of filter cleaning alarm—(3 Options). You can select the combination of loudness, length and pitch
that best suits your needs.
The beep tone is set at the factory to the loudest level (#3), to 3 beeps and to normal pitch.
The filter cleaning alarm will sound when the total cooking time reaches the set time (in hours).
To Select Loudness Level
1. Open the door and leave it open.
The oven lamp will turn on. “0” will appear in the display.
2. Touch Prog Pad first and then touch Start Pad.
“3 bEEP” and pattern of beep sound settings indicator “1” will appear in the
Digital Display Window and “PROG” will blink.
3. Select the desired sound loudness level by touching Start Pad.
Repeated touching of Start Pad will lower the loudness of the tone all the way to
silent. The tone will sound at its loudness level and the Digital Display Window will
display loudness level in digits (3 to 0loud to silent) followed by the word “bEEP”.
[Example]: 3 bEEP—Loudest (Factory Setting) 1 bEEP—Low
2 bEEP—Mid 0 bEEP—Silent
4. Touch Prog Pad again, and “PROG” will stop blinking, and the set loudness of
beep tone will appear for 3 seconds. Then “0” will appear.
To proceed to set length of beep tone, touch Start Pad before “0” is displayed after
Step 4.
To Select Length of Tone
There are 3 options for the length of beep tone at the end of heating cycle.
1st. 3 beeps (Factory Setting)
2nd. Short beeps for 60 seconds
3rd. “Beep” sounds for 5 seconds, and then 3 beeps sound 30 seconds later and
again 60 seconds later. (Beep reminder functions to prevent food from being
forgotten in the oven.)
5. Within 3 seconds after touching Prog Pad at Step 4, touch Start Pad.
A. “PROG” will blink.
B. Current length of beep tone will blink.
C. The display changes to 1st, 2nd, and 3rd each time Start Pad is touched (in
the bottom left corner).
6. When the desired length of tone has been selected, touch Prog Pad again.
“PROG” will stop blinking, and the set length of tone at the end of heating cycle
will appear for 3 seconds, then “0” will appear.
To proceed to set pitch of beep tone, touch Start Pad before “0” is displayed after
Step 6.
(Continued on next page.)
How to Operate
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-1878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-1878 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info