734754
21
Zoom out
Zoom in
Previous page
1/35
Next page
– 21 –
D. Programming Memory Pads for 2 to 5 Stage Heating
1. Follow Steps 1-5 in “C. Programming Memory Pads for Single Stage Heating” on
page 20.
2. Select Power Level for the second stage by touching Power Level Selector Pad.
The selected Power Level will be displayed in the window and the second stage
heating indicator “2” will start to blink.
[Example]: Touch Power Level Selector Pad once for P10 power.
3. Set the desired heating time by touching appropriate Number Pads.
Note: The maximum set time for P1 and P0 is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes for continuous
heating (1 to 5 stage heating) that excludes P1 and P0.
[Example]: Touch Number Pads “2”, “0” and “0” for 2 minutes.
4. Touch Prog Pad again and the “PROG” sign and the second stage heating
indicator “2” will stop blinking. The total time for both stages will be displayed.
This means that you have completed programming the desired Memory Pad for
the second stage heating.
5. 3 seconds after programming is completed, “0” will appear.
6. Program the remaining pads as desired by repeating the Steps above.
Note: Repeat the above procedure to set Heating for the third stage and later
stages.
E. Memory Pad Heating
1. Open the door.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
Note: While “0” will appear, operation is available. 1 minute after the door is
closed, “0” will disappear.
2. Put the food into a suitable container, place it in the centre of the oven and then
close the door securely.
The oven lamp will turn off.
3. Touch the desired Memory Pad.
A. The currently programmed information will be indicated.
[Example]: Touch Memory Pad “5” (Program No. A-5).
The total number of stages is displayed as in the bottom.
The heating program (at P1 power for 1 minute, at P10 power for
2 minutes) as programmed on pages 20-21 is set.
Note: To use B or C side Program, touch Shift (A/B/C) Pad before touching
Program Number Pad.
4. Touch Start Pad.
A. During operation, the indicator appears in order from the left.
B. The heating time will count down.
When touching Power Level Selector Pad, the current power level will be
displayed for 3 seconds.
C. When touching Start Pad, the current stage number will be displayed for
3 seconds instead of Program No.
(Continued on next page.)
How to Operate
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-1878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-1878 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info