734754
20
Zoom out
Zoom in
Previous page
1/35
Next page
– 20 –
7. Open the door and take the food out.
The oven lamp will turn on. The digital display will show the originally selected
time and heating stage number.
8. Close the door.
The oven lamp will turn off and 1 minute later the Digital Display Window will go
blank.
Note: For the heating cycle of the third and later stages, select Power Level once
again after Step 2 on page 19 and set a heating time.
See Special Note of “A. Manual Single Stage Heating” on page 19.
C. Programming Memory Pads for Single Stage Heating
The oven can not be programmed until the program lock feature is deactivated.
(See page 24, K. To Deactivate Program Lock.)
1. Open the door and leave it open.
2. Touch Prog Pad.
“PROG” sign will start to blink in the Digital Display Window.
3. Touch Memory Pad you desire to program.
The pad number and the previously programmed information will appear in the
Digital Display Window. If it is the first time to program the Memory Pad, cooking
time will not appear.
[Example]: Touch Memory Pad “5” (Program No. A-5).
Note:
When you want to program B or C side, touch Shift (A/B/C) Pad before
touching Program Number Pad.
4. Select the desired Power Level by touching Power Level Selector Pad.
The selected power level will be displayed in the window and the single stage
heating indicator “1” will start to blink.
[Example]: Touch Power Level Selector Pad 10 times for P1 power.
5. Set the desired heating time by touching the appropriate Number Pad.
Note: The maximum set time for P1 and P0 is 30 minutes, and
15 minutes for all others.
[Example]: Touch Number Pads “1”, “0” and “0” for 1 minute.
6. Touch Prog Pad again.
The “PROG” sign and the single stage heating indicator “1” will stop blinking. This
means that you have completed programming the selected Memory Pad for the
single stage heating.
7. 3 seconds after programming is completed, “0” will appear.
8. Program the remaining Memory Pads as desired by repeating Steps 2-6 above.
Note: When the “PROG” Display is blinking, the program can be cancelled and/or
one touch on Stop/Reset Pad erased the programmed Number/Memory Pad
number.
How to Operate
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-1878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-1878 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info