103431
110
Zoom out
Zoom in
Previous page
1/116
Next page
Others
110
VQT0Q28
Troubleshooting
If you put the menu back to the settings at
the time of purchase, the conditions may be
improved.
Carry out the [RESET] in the [SETUP]
menu. (P23)
Battery and the power source
1: The camera cannot be operated even
when it is turned on.
Is the battery inserted correctly?
Is the battery sufficiently charged?
Use a battery that has been
sufficiently charged.
2: The camera is turned off immediately
even after it is turned on.
Is the battery charge insufficient to
operate the camera?
Use a battery that has been
sufficiently charged.
Recording
1: The picture cannot be recorded.
Is the card inserted?
Is the mode dial correctly set?
Is there any memory capacity left on
the card?
Before recording, delete some
pictures.
2: The subject is not focused properly.
The focus range varies depending on
the recording mode.
Rotate the mode dial to set to the
proper mode for the distance to the
subject.
Is the subject out of the focus range?
(P33)
When you cannot focus on the subject
even if you tried many times, turn the
camera off once and turn it on again.
3: The recorded picture is blurred.
When taking a picture in shaded areas
or indoors, the shutter speed becomes
slow and the optical image stabilizer
function may not work properly. In this
case, we recommend holding the
camera with both hands firmly to take
pictures. When you take pictures with
slow shutter speed, we recommend
using a tripod. (P32)
LCD monitor
1: The brightness of the screen
becomes dark or bright for a moment.
This phenomenon appears when
pressing the shutter button halfway to
set the aperture value and does not
affect the recorded pictures.
2: The picture is not displayed on the
LCD monitor.
Does the picture appear on the
Viewfinder?
Press the [EVF/LCD] button to switch
to LCD monitor display.
3: The screen is too bright or dark.
Adjust the brightness of the screen.
4: Some pixels are inactive or always lit
on the LCD monitor.
These pixels do not affect the recorded
pictures.
This is not a malfunction.
5: Noise appears on the LCD monitor.
In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
6: A vertical red line appears on the LCD
monitor.
This is called smear. It is specific to
CCD, not a malfunction. It appears
when the subject has a bright part. It is
recorded on motion images, but not
recorded on still pictures.
VQT0Q28ENG.book 110 ページ 2005年2月14日 月曜日 午後5時31
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC FZ5 EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC FZ5 EG in the language / languages: English as an attachment in your email.

The manual is 7,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info