103431
111
Zoom out
Zoom in
Previous page
1/116
Next page
Others
111
VQT0Q28
Flash
1: Flash is not activated.
Is the flash closed?
Press the [ OPEN] button to open
the flash.
In motion image mode [ ],
[SCENERY], [NIGHT SCENERY] or
[FIREWORKS] in scene mode (P63),
the flash setting is fixed to the Forced
OFF [ ] even if the flash is opened.
2: The flash is activated 2 times.
When you select AUTO/Red-eye
reduction [ ], the first flash is
activated for red-eye prevention on the
subject (red-eye phenomenon) before
actually recording pictures. After the
first flash, the flash is activated again for
recording.
Playback
1: Pictures being played are rotated and
displayed in an unexpected direction.
The camera has a function to
automatically rotate and display pictures
recorded by holding the camera
vertically.
(If you take pictures aiming the camera
up or down, the camera may recognise
that it is held vertically.)
When [ROTATE DISP.] (P85) is set to
[OFF], you can display the pictures
without being rotated.
You can rotate pictures with [ROTATE]
function (P85).
2: The picture is not played back.
Is the mode dial set to playback [ ]?
Is the card inserted?
Is there a picture in the card?
3: The picture played back looks rough.
Noise appears on the picture.
Is the ISO sensitivity is high or is the
shutter speed slow?
Decrease the ISO sensitivity. (P73)
Set [PICT.ADJ.] to [NATURAL]. (P80)
Take pictures in bright places.
TV, PC and printer
1: The picture does not appear on the
television.
Is the camera connected to the TV
correctly?
Set the TV input to external input mode.
2: When connecting to a PC, pictures
cannot be transferred.
Is the camera connected to the PC
correctly?
Is the camera recognised by the PC
correctly?
Set [USB MODE] to [PC]. (P96)
3: The card is not recognised by the PC.
Disconnect the USB connection cable
and then connect it again with the card
inserted into the camera.
4: The pictures cannot be printed with
the camera connected to printers.
Is the printer supporting PictBridge?
You cannot print pictures with printers
which do not support PictBridge
(P99).
Set [USB MODE] to [PictBridge (PTP)].
(P96)
5: Both ends of the picture recorded by
setting the picture size to [HDTV]
(1920t1080 pixels) are cut out.
When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
When using the printer with a trimming
feature or other feature which cuts out
both edges of the pictures, cancel the
feature for printing. The feature
depends on the printer used.
Refer to the operating instructions of
the printer for details.
VQT0Q28ENG.book 111 ページ 2005年2月14日 月曜日 午後5時31
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC FZ5 EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC FZ5 EG in the language / languages: English as an attachment in your email.

The manual is 7,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info