628266
93
Zoom out
Zoom in
Previous page
1/172
Next page
See Page 40 for details about the
characters that can be input for address
entry.
If
the other party has the same SIP domain
name as yours, you can register only their
SIP user name. If the other party has a
different SIP domain name from yours, their
SIP domain name must be entered along
with their SIP user name.
If the SIP domain name is not entered, your
own SIP domain name is automatically
appended to the registered contact. This
may result in a different, unintended party
being registered as a contact, so be careful
when entering a contact’s information.
When using H.323, you can also call by
entering the other party’s IP address (or
host name) %H.323 extension number (or
H.323 name).
Enter a standards-compliant value.
For details, contact your network
administrator.
4. Press [G].
A dialogue box to confirm the saving of settings
is displayed.
5. Use [
][ ] to select "Yes" and press [Enter].
The contact list screen is displayed.
Note
To continue entering another contact, press
[B] and repeat steps 35.
6. Press [Home].
The Home screen is displayed.
Registering a Multiple-party Contact
Note
When using H.323, you cannot register a
multiple-party contact.
If you are using the KX-VC300, registering a
multiple-party contact can only be done after
purchasing an activation key card
(KX-VCS301) to activate multiple
-party video
conference calls (Page 127). For details about
the activation key, contact your dealer.
1. Press [Menu].
The Menu screen is displayed.
2. Use [ ][ ] to select "New Contact" and press
[Enter].
The
contact list registration screen is displayed.
3. Use [ ][ ]
to select the following items for input:
"Group/Site": Enter a name for the video
conference call (up to 24 characters) (Page 137).
"Speed Dial": Enter a speed dial number (1300).
"Multi-Point": Use [
][ ] to select "2 sites" or
"3 sites".
For "Site 1"/"Site 2"/"Site 3": Use the following
procedure to select these from the contact list
screen.
1. Use [ ][ ] to select "Site 1", "Site 2" or
"Site 3".
2. Press [Enter].
The contact list screen is displayed.
3. Select a contact using [
][ ].
You can use [
][ ] or the numeric
buttons of the remote control to select the
displayed tab (Page
45).
4. Press [Enter].
The contact list registration screen is
displayed.
Note
When "Multi-Point" is set to "2 sites" or
"3 sites", the maximum bandwidth that is
set on the connection settings screen
(Page 98), or on the select local site
screen when a local site is selected
(Page 131) is applied.
4. Press [G].
A
dialogue box to confirm the saving of settings
is displayed.
5. Use [
][ ] to select "Yes" and press [Enter].
The contact list screen is displayed.
Document Version 2013-09 User Manual 93
Contacts and Settings
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info