734786
39
Zoom out
Zoom in
Previous page
1/60
Next page
2Enter the current 4-digit base unit PIN
(default: 0000).
3Enter the new 4-digit base unit PIN. a
MOKN
4MbN: Yes a MOKN a MOFFN
Registering a unit
Operating additional units
Additional base units
Handsets can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when Auto is selected on
base unit (page 39), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
RCalls are disconnected when the handset
moves from one radio cell to another.
Registering a handset to a base
unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1Handset:
MMENUN (right soft key) #130
2MbN: Select a base unit number. a MOKN
RThis number is used by the handset as
a reference only.
3Base unit:
Press and hold MLOCATORN for about 5
seconds.
RIf all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step. (KX-TGJ422/
KX-TGJ423/KX-TGJ424)
4Handset:
MOKN a Wait until Base PIN is
displayed. a Enter the base unit PIN
(default: 0000). a MOKN
RIf you forget your PIN, see page 53.
Selecting a base unit
When Auto is selected, the handset
automatically uses any available base unit it is
registered to. When a specific base unit is
selected, the handset makes and receives
calls using that base unit only. If the handset is
out of range of that base unit, no calls can be
made.
1MMENUN (right soft key) #137
2MbN: Select the desired base unit number,
or Auto. a MOKN
Important:
RWhen viewing the phonebook, caller list,
etc., only the entries that are stored in the
base unit that the handset is currently
connected to are displayed.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1MMENUN (right soft key) #131
RAll handsets registered to the base unit
are displayed. (KX-TGJ422/
KX-TGJ423/KX-TGJ424)
2MbN: Select the handset you want to
cancel. a MOKN
3MbN: Yes a MOKN a MOFFN
Cancelling a base unit
A handset can cancel a base unit that it is
registered to. This allows the base unit to end
its wireless connection with the system.
1MMENUN (right soft key) #139
2MbN: Select the base unit you want to
cancel. a MOKN
3MbN: Yes a MOKN a MOFFN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 39
Programming
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGJ422E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGJ422E in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info