734786
38
Zoom out
Zoom in
Previous page
1/60
Next page
nWhen monitoring from an outside line:
Answer the call.
If you want to respond from your monitoring
phone, press #1 using tone dialling.
You can turn off the baby monitor feature
by pressing #0.
Note:
RThe unit disconnects the call
automatically after 2 minutes.
Other programming
Changing the handset name
The default handset name is Handset 1 to
Handset 4. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 38).
1MMENUN (right soft key) #104
2Enter the desired name (10 characters
max.).
3MOKN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is Off.
1MMENUN (right soft key) #105
2MbN: Select the desired setting. a MOKN
a MOFFN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1MMENUN (right soft key) #256
2Enter the base unit PIN (default: 0000).
RIf you forget your PIN, see page 53.
3MbN: Select the handsets to be restricted.
a MSELECTN
R ” is displayed next to the selected
handset numbers.
RTo cancel the selected handsets:
MbN: Select the handset. a Press
MSELECTN again. “ ” disappears.
4MOKN
5MbN: Select a memory location. a MOKN
6Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MOFFN
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
Enhanced. When Enhanced is selected,
is displayed. The default setting is
Normal.
1MMENUN (right soft key) #729
2MbN: Selected the desired setting. a MOKN
3MOFFN
Note:
RIf you set repeater mode to On
(page 40):
Security is set to Normal and is
displayed.
Security is not displayed in the
display menu (page 32).
RWhen enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
RIf you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 53.
1MMENUN (right soft key) #132
38 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGJ422E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGJ422E in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info