511594
41
Zoom out
Zoom in
Previous page
1/56
Next page
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1 Dial your phone number from a
touch-tone phone.
2 Let the phone ring 15 times.
R A long beep is heard.
3 Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 40).
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings Number of Rings before the
unit answers a call. You can select 2 to 9
rings, or Auto.
The default setting is 5 Rings.
Auto: The unit’s answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 40), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
(middle soft key) #211
2 MbN: Select the desired setting. a
a M N
For service provider voice mail
subscribers
To receive voice mail and use the answering
system properly, please note the following:
R “Voice mail” is a service provided by your
service provider/telephone company
(page 43). You will need to first subscribe
or activate this service through your service
provider/telephone company. Contact your
service provider/telephone company on
how to operate this service and how you
will be notified that you have messages on
your voice mail.
To use this service you will be required to
leave your answering machine off on your
unit.
This will allow the voice mail to receive any
messages.
R To use the unit’s answering machine rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to have it removed or
deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the Number of
Rings to a shorter duration on your unit
so your unit’s answering machine can pick
up the call prior to the voice mail provided
by your service provider/telephone
company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is 3 Minutes.
1
(middle soft key) #305
2 MbN: Select the desired setting. a
a M N
SelectingGreeting Only
You can select Greeting Only which sets
the unit to announce a greeting message to
callers but not record messages.
Select Greeting Only in step 2 on
“Caller’s recording time” page 41.
Note:
R When you select Greeting Only:
If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
41
Answering System
TG816xAL(e)_0131_ver001.pdf 41 2012/01/31 20:20:21
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG8163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG8163 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info