734780

Panasonic KX-PRW120E Manual

59
Zoom out
Zoom in
Previous page
1/68
Next page
Caller ID/Talking Caller ID
Problem Cause/solution
Caller information is not
d
isplayed.
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is
d
isplayed or announced
late.
R Depending on your service provider/telephone company, the
unit may display or announce the caller’s information at the
2nd ring or later. Set the first ring to “Off” (page 24).
R Move closer to the base unit.
Caller information is not
a
nnounced.
R To use the Talking Caller ID feature, store the name and
phone number in the phonebook (page 19).
R The handset ringer volume is turned off. Adjust it (page 15, 24).
R The Talking Caller ID feature is turned off. Turn it on (page 24).
R Depending on the number of rings setting, the answering
system may answer calls before announcing the caller
information. Select a different setting (page 48).
Time on the unit has
s
hifted.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to “Manual” (off) (page 24).
SMS (Short Message Service)
Problem Cause/solution
The SMS message
c
entre number is logged
in the caller list and the
message is not received.
R Someone tried to send you a message while SMS is turned off.
Turn it on (page 38).
I cannot send or receive
S
MS messages.
R You have not subscribed to the appropriate service. Contact
your service provider/telephone company.
R The SMS message centre number(s) are not stored or are
incorrect. Store the correct numbers (page 38).
R Message transmission was interrupted. Wait until the message
has been sent before using other telephone functions.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
“F
D” is displayed. R The unit could not connect to the SMS message centre.
Confirm that the correct SMS message centre numbers are
stored. Confirm that SMS is turned on (page 38).
“F
E” is displayed. R An error occurred while sending the message. Try again.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
59
Useful Information
PNQX6093XA_0705_ver300.pdf 59 2013/07/05 15:30:01
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-PRW120E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-PRW120E in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info