Note:
R T
o stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1 MM
enuN (right soft key) a
a MO
KN
2 To see the entries on the selected date,
press MOKN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: “Detail” a MOKN
Editing an entry
1 MM
enuN (right soft key) a
a MO
KN
2 MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Edit” a MOKN
4 Edit the date if necessary. a MOKN
5 Edit the time if necessary. a MOKN
6 Edit the text memo if necessary (30
characters max.). a MOKN
7 MbN: Select the desired alarm tone. a
MOKN 2 times a M
N
Erasing an entry
S
chedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1 MMenuN (right soft key) a
a MO
KN
2 MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Erase” a MOKN
4 MbN: “Yes” a MOKN a M
N
Erasing all entries
1 MM
enuN (right soft key) a
a MO
KN
2 MListN a MMenuN
3 MbN: “Erase All” a MOKN
4 MbN: “Yes” a MOKN
5 MbN:
“Yes” a MOKN a M
N
Registering a unit
Operating additional units
Additional handsets
U
p to 6 handsets can be registered to a single
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
Additional base units
H
andsets can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when “Auto” is selected on
base unit (page 32), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
R Calls are disconnected when the handset
moves from one radio cell to another.
Registering a handset to a base
unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
n
ear the base unit), re-register the handset.
1 Handset:
MMenuN (right soft key) #130
2 MbN: Select a base unit number. a MOKN
R This number is used by the handset as
a reference only.
3 Base unit:
Press and hold M
N
for about 5 seconds.
31
Programming
