3 U
se the DC extension cord (A) to
connect the AC adaptor (B) to the
siren.
R Insert the male plug of the DC
extension cord (C) firmly into
the DC jack (D, E).
R Insert the female plug of the DC
extension cord (F) firmly into
the AC adaptor plug (G).
4 Connect the AC adaptor to the
power outlet (H).
5 A
ttach the siren to the rear cover.
R Insert the grooves on the siren
to the 4 tabs on the rear cover,
and then push down the siren.
Note:
W
hile the siren is sounding or the
strobe light is flashing, you can stop the
siren by pressing M
N.
Note about power
connections
AC adaptor connection
R T
he AC adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use.)
R The AC adaptor should be
connected to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it
to become disconnected.
Power failure
R T
he siren will not work during a
power failure.
For a
ssistance, please visit http://shop.panasonic.com/support
11
Setup