4 I
nstallation
Install the siren in the desired
location.
Registering the siren
This procedure is not required for
d
evices that were included as part of
a bundle.
Before you can use the siren, it must
b
e registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
Note:
R Before registering the siren, make
sure the AC adaptors of the hub and
siren are connected and each
device is powered.
Using registration buttons
1 H
ub:
Press and hold M
OTHER
D
EVICEN until the LED indicator
blinks slowly in green.
2 Siren:
Press and hold M
N
until the
LED indicator blinks slowly in
green (page 7).
R When registration is complete,
the hub sounds one long beep.
Note:
R To cancel without registering the
siren, press M
N
on the hub and
on the siren again.
R I
f registration fails, the hub sounds
several short beeps.
Using the app
W
hen you register the siren by using
the [Home Network] app, you can
assign a name to your devices and
group them by location. For more
information, refer to the User’s Guide
(page 12).
8
For a
ssistance, please visit http://shop.panasonic.com/support
Setup