Registering
add
itional mobile
devices to the
camera
Do not perform this procedure if
the
camera is integrated with
your Home Network System.
Use the procedure found in the
System Setup Guide included
with your hub and register the
additional mobile device to your
hub.
After you set up the camera, you
can
register additional mobile
devices. You can register up to 8
mobile devices to a camera. Each
mobile device can be registered to
up to 32 cameras.
Confirm the following before you
begin.
– Make sure you have completed
the initial setup procedure
– Make sure your mobile device
can connect to the Internet
– Make sure your wireless router
and the camera are turned on
– Make sure your mobile device
and the camera are connected
to the same wireless router
1 Using the mobile device that
you want to register,
download the [Home
Network] app and then start
th
e app.
R If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
2 Tap [HD Camera].
3 Tap [Add This Mobile
Device].
4 When prompted, press the
MSETUPN button on the back
of the camera.
R The camera registers your
mobile device.
5 When prompted, enter the
password required to access
the camera.
R This password was set
during initial setup.
6 When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R A list of all cameras
registered to the app is
displayed when registration
is complete.
For a
ssistance, please visit http://shop.panasonic.com/support
23
Setup
