26435
70
Zoom out
Zoom in
Previous page
1/92
Next page
70
Operations
For fax advantage assistance, call 1-800-435-7329.
Fax – sending (cont.)
The other party complains that dirty
patterns or black lines appear on their
received document.
The white plate or scanner glass is dirty.
Clean them (p. 77).
I cannot send a fax overseas.
Use the overseas transmission mode of
feature #23 (p. 63).
Add two pauses at the end of the
telephone number or dial manually.
Fax – receiving
I cannot receive documents.
The telephone line cord is connected to
the EXT jack on the unit. Connect to the
LINE jack (p. 17).
When you have a single telephone line
and subscribe to a telephone company’s
voice mail service, you must also
subscribe to the Distinctive Ring Service
(p. 46).
I cannot receive documents automatically.
The receiving mode is set to TEL mode.
Set to FAX ONLY mode (p. 43).
The time taken to answer the call is too
long. Decrease the number of rings of
feature #06 (p. 61).
The display shows the following, but faxes
are not received.
The incoming call is not a fax. Change the
receiving mode to TEL mode (p. 42).
A blank sheet is ejected.
The other party placed the document in
their fax machine the wrong way. Check
with the other party.
A white line or a dirty pattern appears on
your recording paper.
The white plate, scanner glass or lower
glass are dirty. Clean them (p. 77–79).
(continued)
The printing quality is poor.
The other party sent a faint document. Ask
them to send a clearer copy of the
document.
Some paper has instructions
recommending which side to print on. Try
turning the paper over.
You may have used paper with a cotton
and/or fiber content that is over 20%, such
as letterhead or resume paper.
The remaining toner is low. Replace the
toner cartridge (p. 73).
We recommend you replace the drum unit
every third time you replace the toner
cartridge (p. 73). To check the drum life
and quality, please print the printer test list
(p. 80).
The toner save mode of feature #79 is on
(p. 65).
The other party complains that they
cannot send a document.
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper
(p. 16) or clear the jammed paper (p. 75).
Receiving mode
I cannot select the desired receiving mode.
If you want to set FAX ONLY mode:
— press PQ to turn on the
FAX ON light.
If you want to set TEL mode:
— press PQ to turn off the
FAX ON light.
The Distinctive Ring of feature #31 is
activated (page 46).
The other party complains that they
cannot send a document.
The unit is not set to FAX ONLY mode.
Press PQ to turn on the
FAX ON light.
CONNECTING.....
ON
OFF
KX-FLB756 (066-072) 03.4.14 9:17 PM Page 70
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-FLB756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FLB756 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info