26435
69
Zoom out
Zoom in
Previous page
1/92
Next page
69
Operations
For fax advantage assistance, call 1-800-435-7329.
When a function does not work, check here
before requesting help!
General
I cannot make and receive calls.
The power cord or telephone line cord is
not connected. Check the connections
(p. 17).
If you used a splitter to connect the unit,
remove the splitter and connect the unit to
the wall jack directly. If the unit operates
properly, check the splitter.
I cannot make calls.
The dialing mode setting is wrong. Change
the setting of feature #13 (p. 62).
The unit does not work.
Disconnect the unit from the telephone line
and connect the line to a known working
telephone. If the working telephone
operates properly, contact our service
personnel to have the unit repaired. If the
working telephone does not operate
properly, contact your telephone company.
The unit does not ring.
The ringer volume is set to off. Adjust it
(p. 22).
The other party complains they only hear
a fax tone and cannot talk.
FAX ONLY mode is set. Tell the other
party the number is only used for faxes.
Change to TEL mode (p. 42).
If you use a distinctive ring service, turn
AUTO ANSWER off so that the fax
machine is in TEL mode.
If you use a distinctive ring service, make
sure you have set the same ring pattern
assigned by the telephone company
(p. 46).
The RS button does not
function properly.
If this button is pressed during dialing, a
pause will be inserted. If pressed
immediately after a dial tone is obtained,
the last number dialed will be redialed.
The receiving mode does not function
properly.
A Distinctive Ring pattern of feature #31 is
set (p. 64).
(continued)
During programming, I cannot enter the
code or ID number.
All or part of the numbers are the same.
Change the number of features #12
(p. 62) and #41 (p. 64).
The unit beeps.
Recording paper has run out. Press
{ to stop the beeps and install
paper.
Whenever I try to retrieve my voice mail
messages, the retrieval is interrupted by
the fax tone.
You are probably entering :
#
9. This is
the default setting for the fax activation
code. If you use a voice mail service, set
the fax activation feature to off or
reprogram the activation code (feature #41
on page 64).
Fax – sending
I cannot send documents.
The telephone line cord is connected to
the EXT jack on the unit. Connect to the
LINE jack (p. 17).
The other party’s fax machine is busy or
has run out of recording paper. Try again.
The other party’s machine is not a
facsimile. Check with the other party.
The other party’s fax machine rings too
many times. Send the fax manually
(p. 31, 32).
The other party complains that letters on
their received document are distorted or
not clear.
If your line has special telephone services
such as call waiting, the service may have
been activated during fax transmission.
Connect the unit to a line that does not
have these services.
The extension telephone on the same line
is off the hook. Hang up the extension
telephone and try again.
Try copying the document. If the copied
image is clear, there may be something
wrong with the other party’s machine.
(continued)
KX-FLB756 (066-072) 03.4.22 4:58 PM Page 69
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-FLB756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FLB756 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info