424269
61
Zoom out
Zoom in
Previous page
1/86
Next page
7. Programmable Features
59
Changing base unit PIN
The base units PIN is set at the factory to
0000. If you change the PIN, please write
down your new PIN as the unit will not reveal
the PIN to you. If you forget your PIN, consult
our Customer Care Centre (page 11).
1. Press {j}.
2. Press {e} or {v} repeatedly to display
SETTING BS.
3. Press {>}.
L INPUT CODE will be displayed.
4. Press {5}.
5. Enter the current 4-digit base unit PIN.
6. Enter the new 4-digit base unit PIN.
7. Enter the new 4-digit base unit PIN again to
verify.
8. Press {ih}.
Setting call restriction
You can restrict selected handset(s) from dialling
selected phone numbers. You can assign up to
10 call restriction numbers (up to 8 digits). If you
dial a restricted number, the call will not be
connected and the restricted number will flash
on the display.
1. Press {j}.
2. Press {e} or {v} repeatedly to display
SETTING BS.
3. Press {>}.
L INPUT CODE will be displayed.
4. Press {6}.
5. Enter the 4-digit base unit PIN.
L The default PIN is 0000.
L All the registered handset numbers are
displayed.
L If you programmed previously, the pre-
selected handset number flashes.
6. Press the desired handset number(s).
L The selected handset number will flash.
L To cancel the selected handset number,
press the number again. The number will
stop flashing.
7. Press {>}.
8. Enter the phone number to be restricted, up
to 8 digits.
L Do not enter the same number as
programmed for the fax activation code
(feature #41, page 52).
9. Press {>} or {j}.
L To enter other numbers, repeat steps 8
and 9 (up to 10 numbers).
10.Press {ih}.
Turning off/on call restriction
1. Press {j}.
2. Press {e} or {v} repeatedly to display
SETTING BS.
3. Press {>}.
L INPUT CODE will be displayed.
4. Press {6}.
5. Enter the 4-digit base unit PIN.
L The default PIN is 0000.
6. Press the desired handset number.
L Handset numbers will be displayed.
Flashing numbers indicate call restriction
is on; non-flashing numbers indicate call
restriction is off. Press the desired
handset number to turn off/on.
7. Press {>} or {j}.
8. Press {ih}.
Cancelling a call restricted number
1. Press {j}.
2. Press {e} or {v} repeatedly to display
SETTING BS.
3. Press {>}.
L INPUT CODE will be displayed.
4. Press {6}.
5. Enter the 4-digit base unit PIN.
L The default PIN is 0000.
6. Press {>} repeatedly to display the desired
call restricted number.
7. Press {C}.
8. Press {>} or {j}.
9. Press {ih}.
Resetting the handset settings that use the
base unit PIN to their default settings
The handset can be reset to the following default
settings.
Feature Default setting
Ringer mode (page
62)
1
Number of rings
(page 63)
3
Base unit PIN 0000
Call restriction All clear
Caller information
(page 33)
All clear
FC195E.book Page 59 Wednesday, March 5, 2003 7:15 PM
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info