424269
56
Zoom out
Zoom in
Previous page
1/86
Next page
7. Programmable Features
54
Code #67: Setting the incoming message
monitor
ICM MONITOR
=ON [±]
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
ON (default): You can monitor the incoming
message.
OFF: Deactivates this feature.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON [±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
ON (default): To send a fax even if there is static
interference on the telephone line.
OFF: Deactivates this feature.
L You cannot change the setting when received
documents are in memory.
Code #70: Calling your pager
PAGER CALL
=OFF [±]
See page 49 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
partys machine.
L If the ring back tone continues, the other
partys machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
ON (default): You will hear connecting tones.
OFF: Deactivates this feature.
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
=TAD/FAX [±]
TAD/FAX (default): Telephone Answering
Device/Facsimile mode (page 39)
FAX ONLY: Facsimile only mode (page 39)
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select YES.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
L ECM selection (feature #68, page 54) will
not be reset.
Features (Han dset)
7.4 Handset programming
To exit programming, press {ih} any time.
Time alarm settings
Set the time and date on the handset beforehand
(page 23).
Setting the time of alarm
1. Press {j}.
2. Press {e} or {v} repeatedly to display
SETTING HS.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
TIME ALARM.
5. Press {>}.
6. Press {e} or {v} repeatedly to display SET
TIME.
7. Press {>}.
8. Enter the desired hour/minute by selecting 2
digits for each (24 hour clock entry).
L To clear, press {C}.
9. Press {>}.
{>}{e}{v}
{j}
{ih}
{C}
FC195E.book Page 54 Wednesday, March 5, 2003 7:15 PM
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info